Under-Slab Vapor Barriers: Restricting Moisture and Soil Gas Infiltration ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s421150/www.aecdaily.com/course/925438

Moisture and soil gas beneath concrete slabs can cause a myriad of problems in both residential and commercial applications. The causes and consequences of these problems are reviewed in this course, along with a discussion on the types and characteristics of under-slab water vapor and soil gas barriers.

Bike Parking Guide ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9210/www.aecdaily.com/course/968513

Bicycling is a healthy activity that improves cardiovascular health and reduces obesity and disease. It can be an excellent mode of transportation for people of all ages. Biking is increasingly becoming the first choice as an alternative means of transportation, but bicycles require safe and secure storage. This course discusses bicycle parking options that meet security, durability, and aesthetic standards.

Protected Membrane Roof (PMR): Innovative Solution for Sustainable Commercial Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091539

Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options.

Upward-Acting Commercial Sectional Door Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s10851/www.aecdaily.com/course/574010

Upward-acting commercial sectional door systems can be a major contributor to controlling energy costs in buildings. This course evaluates the materials and construction of various door types and discusses the selection criteria and operation features that are available to enhance door performance for a range of applications.

Noise Control for Floor-Ceiling Assemblies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/1068347

The demand for noise control is increasing due to a growing population, greater expectations of sound privacy, and an increasing awareness of the harmful effects of noise pollution. Noise control is a key component of design because it affects occupant privacy and well-being. This course reviews the design of floor-ceiling assemblies to improve acoustics and occupant wellness.

Thermal Bridging & Thermal Break Solutions ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671

The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.

Designing Sustainably with Redwood Timbers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s632921/www.aecdaily.com/course/836218

Redwood Timbers are a safe, strong, and sustainable option for exterior and interior building projects where natural wood is desired. This course provides an overview of the properties of Redwood Timbers including insulation properties, grades, dimensions, fasteners, finishing options, and strength. It concludes with numerous case studies exploring the use of Redwood Timbers for post and beam construction, decorative elements, deck posts, and outdoor living structures.

Thermal Bridging: Small Details with a Large Impact ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/970291

Uncorrected thermal bridging can account for 20–70% of heat flow through a building's envelope. Improving details to mitigate both point and linear thermal bridges will significantly improve energy performance. This course reviews types of thermal bridges, examines how they appear in codes and standards, and explores some mitigation concepts and principles. Calculation methods to account for thermal bridging in your projects are introduced, and a sample design project is used to demonstrate code compliance.

The Role of Door Openings in Improving Resilient Design. ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/869476

Resiliency is a growing necessity. It is important to understand the impacts on the built environment resulting from natural and manmade disasters and disturbances and to design for those impacts now. Presented in this course is an overview of the benefits of using steel doors as part of a resilient design strategy for applications requiring resistance to blasts, tornadoes, and ballistics.

Strength and Conditioning Facilities: Why Flooring Is Key to Supporting High-Performance Athletes ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/944271

Strength and conditioning facilities are designed for high-performance athlete training at the professional, international, national, collegiate, and high school levels. These facilities are fundamentally different than commercial fitness centers (which focus on improving general fitness) and must be custom designed for the athletes' sport-specific training programs. This course reviews key design considerations for these facilities, including specialized flooring construction required for athlete safety and preservation of building structure.

Underslab Vapor Retarders in Buildings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/969550

Underslab moisture is something that designers need to take into consideration in both the design and construction phases of a building project. It can cause many problems for the building and the health of its occupants over the course of its life span; however, if properly addressed during design and construction, many of these issues can be mitigated. This course looks at the different types of moisture movement that exist below the slab, examines solutions for a variety of site conditions, and reviews best practices for managing moisture.

Unlocking Wastewater's Potential ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1070292/www.aecdaily.com/course/1096090

What is wastewater energy recovery and how does it apply to the future of energy efficiency and decarbonization? In this course, we will explore how this previously overlooked source of energy loss from buildings can be utilized to endlessly recover and recycle energy within projects ranging from individual multifamily residential buildings to commercial and industrial applications and even to district energy networks. Wastewater heat recovery and transfer technologies used in small- and large-scale applications are also discussed, with case studies showcasing the practical applications and garnered benefits.

Synthetic Surfacing for Rooftops: Elevating the Outdoor Experience ( ~ 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1134203

As cities continue to grow, incorporating synthetic surfacing into rooftop spaces offers a safe, practical, and innovative solution to creating more livable, attractive, and resilient urban environments. The course explores synthetic rooftop surfacing, including its applications; environmental, health, and safety benefits; and product, manufacturer, and installer certifications. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

Designing for Sustainability: Synthetic Turf and the Triple Bottom Line ( ~ 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967

As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

Heat Recovery Ventilation: Why Efficiency Matters ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/888488

In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.

Synthetic Turf for Recreation Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1044992

Communities need accessible, versatile surfaces for play and relaxation for people of all ages and abilities. Modern landscape synthetic turf options are specifically formulated for public recreation spaces frequented by adults, children, and pets. This course reviews the health benefits of being outdoors, the history and fabrication of synthetic turf, the design considerations for various recreation applications, and synthetic turf’s performance and sustainability characteristics.

Bulletproof Glass and Bullet-Resistant Barriers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s455170/www.aecdaily.com/course/847332

Incorporating bulletproof glass into any facility is a sizable investment; however, it is a small price to pay for the protection of human lives. This course illustrates how to maximize that investment by selecting and installing the appropriate system for the threat level and the functional needs of the client. Discussed are UL protection level ratings; types of bullet-resistant barrier systems and their components; planning, production, and installation of systems; security window film vs. bullet-resistant glass; and project security checklists.

Current Trends in Healthcare Plumbing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/1083088

Healthcare facilities are striving to meet the needs of all patients and caregivers by offering healthy, safe, and inclusive spaces that can be repurposed quickly if needed. This course reviews innovations in plumbing design, such as vacuum plumbing and its applications, and explores how these design innovations support trending healthcare needs, including infection prevention, behavioral healthcare, and bariatric applications, and fulfill ADA requirements. Several case studies showcasing successful examples are also covered.

Enhancing the Built Environment with Architectural Metal Fabric ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s20276/www.aecdaily.com/course/957452

Architectural metal fabric is a dynamic interior and exterior material used to create beautiful and functional façades, balustrades, and screening for a wide variety of commercial and public structures. This course discusses applications for metal fabric and its performance benefits, including safety, security, solar management, and sustainability. It also discusses how coatings and graphics technologies can be incorporated into metal fabrics to enhance branding and visual identity.

Drainage: Vertical and Horizontal Building and Sitework Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s671/www.aecdaily.com/course/992134

Building science experts acknowledge the need for drainage in both vertical and horizontal applications in order to eliminate moisture issues and extend the life of the building. This course examines foundation wall, green roof, and plaza deck applications and discusses the factors that impact drainage, including soil permeability, saturation, land cover, and loading. Flow rate standards are discussed, and drainage composite mat installation is explained.

When Sound Control Matters: Floor Underlayment Solutions ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s682321/www.aecdaily.com/course/856224

Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multistory residential, commercial, and multipurpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment.

Fireproofing Structural Steel ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s7934/www.aecdaily.com/course/945391

Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided.

Synthetic Sports Turf Systems for Safety, Performance, & Durability ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s796052/www.aecdaily.com/course/1132865

Synthetic sports turf systems offer all-weather play for a wide variety of sports and provide a consistent, durable surface with lower maintenance costs than natural grass. This course reviews the components of synthetic turf systems, different product types, and procedures for installation, maintenance, and use. Guidance is offered on how tested values can impact field performance and how to specify a system that meets safety, performance, use, and budget requirements.

Reflective Insulation & Radiant Barriers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s522670/www.aecdaily.com/course/992394

Building systems can be enhanced by incorporating reflective insulation or radiant barriers into the building envelope. With effective insulation, heat transfer is reduced, resulting in less summer heat gain, and less winter heat loss. This course explains common and effective uses for reflective insulation and radiant barriers in a wide range of construction and building applications and demonstrates how these systems reduce energy usage, increase the lifespan of the mechanical equipment for heating and cooling, and reduce maintenance requirements and frequency of replacement.

An Introduction to Air Control Dampers ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1773/www.aecdaily.com/course/880606

Air control dampers are an essential component of a building’s HVAC system, regulating heating, cooling, and ventilation performance. Presented here is an introduction to control, balancing, backdraft, industrial, and multizone dampers; each type plays an important role in the HVAC system. Discussed are damper types, components, and performance metrics. Guidance is provided for damper specification, installation, maintenance, and inspection.