Owens Corning

Owens Corning

https://www.owenscorning.com/commercial

1 Owens Corning Parkway

Toledo

OH 43659

USA

Phone: 1-800-GET-PINK®

Request More Info Request Pricing

Displaying 20 Live course(s).

NFPA 285: What We've Learned, What's Changed, and What We Thought We Knew

Reducing Fire Risk at the Perimeter of the High Rise Structures

Building Enclosure Challenges: Managing Risk and Optimizing Performance

Detailing 201: Maintaining CI and WBRs at Transitions

Vegetative and Protective Membrane Roof Assemblies: What Lies Beneath

The State of Climate Action in The Building Sector: How Architects Can Make...

The Benefits of Mineral Wool as a Continuous Insulation Solution

Surviving & Thriving: What is Resiliency and How Do We Design for It?

Pre-Cast Concrete: Energy Efficiency and Quality Without Compromising Creat...

Perimeter Insulation: When Structure Conflicts with Thermal Performance

Keeping the Lid On: Wind Resistance Design for PRMA Roofing Systems

High Performance Insulation in Commercial Roof Assemblies

Fire Safety in High Rise Structures

Extruded Polystyrene (XPS) Insulation in High Performance Commercial Roofin

Continuous Insulation: The Basics and Beyond

Complete Masonry Veneer Wall Systems

Cellular Glass in High Performance Roofs: Reducing Risk By Design

Building Acoustics: Making Architects Visions a Reality

Air Barriers: Science, Products & Systems

Advanced Testing and Analysis Demonstrates the Design Flexibility of Minera...

  • ( ~ 1 hour ) 

    This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. It addresses code compliance in light of recent material changes, code changes, and additional testing.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    High rise fires are not new to us. In fact, we have seen an increase in fire incidents in Asia, Europe, and the Middle East in the last 5-10 years that have amplified awareness on fire safety performance of taller structures. High rise buildings present a greater risk with an increased number of occupants that have a limited means of escape in the event of a fire. That is why the time element for containing a fire is so critical. Also, as we have seen in actual fires, vertical fire spread at the exterior façade can rapidly overwhelm fire fighters means of interceding the fire from ground level. As the fire accelerates and upward spread progresses, it often reaches a height beyond the reach of fire services water streams. That is why containing a fire and preventing if from spreading vertically is so critical for both occupant and first responder safety.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    When designing the building enclosure from the substrate to the cladding, architects and designers face a host of challenges, from energy code and NFPA 285 fire testing compliance, to ensuring aesthetically pleasing façade design. This course, featuring a panel of four different industry experts, explains design trade-off complexities and strategies to maximize flexibility while maintaining code compliance—and ultimately build a dependable, robust building façade. First, experts will review the challenges of choosing and placing an air and weather barrier. Secondly, codes and thermal bridging will be analyzed to determine insulation and thermal spacer selection. Finally, we will explore critical challenges associated with continuous insulation and the requirements of a rainscreen cladding system.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    From the presenters of “Maintaining Continuous Insulation and AWBs at Transitions” comes the next detailing presentation in the series. This presentation expands on integrating insulation and air barriers using the previously described building science fundamentals but applied to some trickier details. How do you integrate continuous insulation at a foundation where the masonry veneer must rest on concrete foundation walls? How do you attach heavy, but combustible, low mass veneers? Join us to find out.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Protected Roof Membrane Assemblies and particularly Vegetative Roof Assemblies place extreme requirements on the components below the surface from waterproofing to insulation and everything in between. Each component must meet specific standards to achieve energy efficiency and durability. This course describes the high-performance attributes of PRMA components and defines the building code/performance standards and best specification practices to meet fire, wind, thermal, and moisture performance.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    As a significant contributor to global greenhouse gas emissions, the building sector has an immense opportunity to play a role in the efforts to mitigate climate change. This course will give an overview of the global move toward a more sustainable future. We will explore the latest state of knowledge on climate change, the targets, goals, and regulations set to mitigate its worst effects, and what you, as an architect, can do to help. You will also learn about the science behind embodied carbon and why it is important, as well as other tools and resources available to advance the overall sustainability of the built environment.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. When designing exterior wall assemblies, the type and placement of insulation is critical. To address thermal performance, wall systems almost always feature insulation batts — friction fit between framing members. Depending on climate zone and construction type, though, insulation batts alone may not provide enough thermal resistivity. Continuous insulation is increasingly used in conjunction with insulation batts to optimize thermal performance.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Key findings from a recent study conducted by AIA with support from Owens Corning demonstrate that resiliency is a value shared across the design team. However, the interpretation of what resiliency actually means varies greatly based on factors such as design team role, construction type, and experience. This course will consider resiliency from multiple viewpoints, hypothesize on why discrepancies exist when it comes to defining resiliency, and demonstrate actual examples of resilient construction based on recent disaster assessments and actual in situ examples. The content aims to help design team members develop solutions that advance the resilience of commercial buildings.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Pre-Cast Concrete assemblies are often the design solution to tight timelines and practical installation. With the addition of insulation and a toolkit of accessories, designers can improve efficiency, quality, and aesthetic often beyond stick-built options. How do you integrate continuous insulation into walls made from a series of panels shipped across the country? Join us to find out! Real-world case studies will be used to compare and contrast with frame construction.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    When structural stability and thermal continuity collide, structure has historically taken precedence necessitating tradeoffs such as increased insulation in other areas or acceptance of energy loss and potential moisture damage. The foundation transition from below grade to masonry ledge to masonry veneer wall is one such challenge. What if there was a solution? This presentation explores solutions for perimeter foundation insulation including information needed to specify and install correctly.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Commercial roofing systems are quite varied. As such, their performance expectations are varied, and their suitability for different applications vary. Certain types of high performance roofing systems require specific components, and performance standards to achieve energy efficient and durable life cycle performance. This course describes the high-performance attributes of extruded polystyrene (XPS) and cellular glass insulations in commercial roofing applications including PRMA (plaza deck, vegetative roofs, and split slabs), unprotected roof membranes, architectural metal and asphalt pavement systems for which cellular glass and XPS are uniquely suited. It defines the building code/performance standards and best specification practices for those systems. Further, it compares various insulation types, how they are manufactured, and how the manufacturing process affects the physical properties and performance of each type of insulation.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    One of the most complex and least understood areas where fire can propagate is at the perimeter of a multi-story building. Not only can fire spread from floor-to-floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and E2874.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    Commercial roofing systems are quite varied. As such, their performance expectations are varied, and their suitability for different applications vary. Certain types of high performance roofing systems require specific components, and performance standards to achieve energy efficient and durable life cycle performance. This course describes the high performance attributes of extruded polystyrene insulation (XPS) in commercial roofing applications including PRMA (green/vegetated), mechanically attached, architectural metal and recover systems for which XPS is uniquely suited. It defines the building code/performance standards and best specification practices for those systems. Further, it compares various insulation types, how they are manufactured, and how the manufacturing process effects the physical properties and performance of each type of insulation.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    This course is aimed to define what exactly continuous insulation is, and the key benefits of using it. The course will also show participants how continuous insulation complies with building and energy code requirements within that field.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    In today’s high performance building market, specifying materials that work together as a complete wall system is more critical than ever. Systems can help designers meet new energy codes, reduce costs and improve building function and sustainability while making the design process faster and simpler. This course will educate participants on the functional components and system attributes of the most common exterior wall system, steel stud with masonry veneer. The course will detail key system components such as continuous and stud cavity insulation, air/water resistive barriers, air sealing practices, masonry wall ties and water drainage/management practices. Key codes and standards will be reviewed to define system interaction and key specification practices to ensure wall system designs are consistent with recent advances in building analysis, new code requirements, revised test methods, and a comprehensive, systems approach to wall systems.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    High-performing commercial roofs must be resilient and designed to perform over the long run, without compromising on the client's commitment to sustainability. Cellular glass insulation delivers a portfolio of performance attributes including impermeability, non-combustibility, long-term thermal performance, compressive strength, and resilience throughout the assembly. This course will spotlight real-world roof assemblies that leverage cellular glass insulation to achieve performance without compromise.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    This course is designed to provide an introduction to acoustics and will highlight the link between acoustics and the architects vision for a space at the design phase. Understanding how sound travels in buildings is crucial to creating a smart and acoustically sound environment. Architects and building owners invest heavily into designing aesthetics and functionality into a building that represents their vision for its use. However, poor acoustics can disrupt and distract occupants from the architects’ vision for a space. Understanding how sound travels in buildings and how it interacts with various surfaces will provide the knowledge needed to avoid acoustical issues when designing a space. In the event that the building is already experiencing issues, strategies for remediating the issues will also be discussed.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in selecting the best system and installation methods for specific projects.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

  • ( ~ 1 hour ) 

    As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones.

    There doesn't seem to be any scheduled live events for this course. REQUEST one at a convenient time and location for you.

    SAVE FOR
    LATER
     Save to My Courses

Displaying 20 Live course(s).