American Academy of Healthcare Interior Designers

The mission of AAHID is the certification of interior designers qualified by education, examination, training, and experience to provide interior design services to safeguard public health, safety and welfare in the healthcare industry.

Click to Learn More About the American Academy of Healthcare Interior Designers

Displaying 1 - 25 of 73 results.

FIRST [1-25] [26-50] [51-73] NEXT LAST SHOW ALL

  • ( ~ 1 hour ) 

    The variety of wheelchair lifts on the market can present a challenge to specifiers. Not only is there a wide range of design features, but also some lifts may not meet all ADA requirements for a given application. This course covers the features, codes, and regulatory requirements of vertical wheelchair lifts and the benefits of specifying a vertical wheelchair lift solution to both the user and the facility owner.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Vapor barriers beneath concrete slabs on grade are critical for controlling moisture vapor infiltration from the ground. This course provides an overview of vapor barriers used beneath concrete slabs on grade and in crawl spaces, showcasing common flooring failures that occur when a slab is not properly protected. We’ll explore how moisture enters and moves in the concrete, review key prevention and testing methods, and examine relevant industry standards and specification guidance. Finally, we’ll apply these concepts to practical case studies.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Today, architects and designers need to give special consideration to building acoustics when developing plans for new and newly renovated construction projects. Excessive noise in any environment is considered a serious problem that can negatively impact occupant comfort, leading to learning difficulties, sleep deprivation, delayed recovery from illness, and lack of privacy. Sound basics are discussed in this course, and STC, IIC, and sound attenuation (reduction) techniques are explained. Various case studies are examined to develop further understanding of the performance of common sound abatement assemblies that are essential for occupant well-being and comfort.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Vinyl is suitable for many building materials and is often the best selection when durability, aesthetics, and value are vital. This course is intended to help designers and specifiers make the most informed decisions about vinyl product selection. It describes the realities and improvements of today’s vinyl product manufacturing, discusses the latest information about the safety and sustainability of vinyl products, and presents a verification standard for responsible vinyl manufacturing.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The design of behavioral healthcare facilities should address the therapeutic and safety needs of patients and staff while meeting the applicable codes and regulations. Reviewed in this course are ligature-resistant products developed for patient rooms and bathrooms that strike the balance between providing the safest design solutions and creating a noninstitutional environment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Modern hydronic radiator systems are an energy-efficient, healthy, and hygienic solution for residential and commercial applications. This course discusses the principles of radiant heating and panel radiators, and how to size panel radiators for residential applications.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Automated-shading systems are designed to maximize natural daylight, increase building energy efficiency, and ensure occupants have a comfortable environment with views to the outside. This course will explain how an automated shading system predicts, monitors, and responds to the daily microclimate surrounding a building to effectively manage daylight, solar-heat gain, occupant comfort levels, and energy use demands.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Megatrends are long-term global trends that impact societies in complex ways, including design of the built environment. This course examines seven megatrends and how they may inspire kitchen and bath designers to create accessible, diverse, and sustainable solutions to the social and environmental issues our society faces.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Building fires claim nearly 4,000 lives each year in the U.S. It is the responsibility of building designers to do their utmost to prevent such fires and their accompanying loss of life. Often, the difference between life and death is as simple as a fire door that functions properly. This course focuses on describing how design professionals can reinforce their ability to ensure that fire doors are specified, installed, inspected, and maintained properly and that they meet or exceed all relevant code requirements.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Sound control is a critical element in a building’s design. We all think of the walls, ceiling, and floor when discussing sound attenuation, but without the proper acoustic door, the sound-control goals in an acoustic plan may not be met. This course reviews healthy sound levels and how to test and identify target STC ratings. Also discussed are the elements of acoustic door assemblies and how they address fire ratings and ADA compliance, contribute to LEED® certification and green building, and provide security for classified files and electronic data.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Health, safety, and welfare: Three simple words, yet three complex concepts. Every healthcare-related facility has a responsibility to provide a sterile, physically safe, and secure, yet nearly always accessible, managed environment just to conduct its daily operations. This course will help you discover effective, scalable access and control strategies specific to the healthcare environment and introduces the latest standards, codes, products, and technologies impacting the design and management of these always complex, life-giving facilities.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Specialty door and frame assemblies have been developed that are designed specifically for the built healthcare environment where performance criteria are critical. Reviewed in this course are specialty door and frame assemblies that meet the challenges of infection prevention, building cleanliness, patient privacy, and increased security, as well as containment of radio wave and radiation interference in hospitals and clinics.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course discusses healthcare-associated infections (HAIs) and how the built environment can contribute to restricting their spread. We’ll look at the social and financial impact of HAIs and address factors that contribute to the spread of infection. The course offers solutions on how to design spaces and select products to reduce HAI incidences in healthcare settings, improving patient and employee safety and wellness.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course explores how understanding disability can guide the creation of accessible and inclusive spaces. It examines access opportunities in educational and public environments, with an emphasis on strategies that go beyond code compliance. These approaches can help meet credit requirements in the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2 by improving usability, promoting occupant well-being, and reducing long-term barriers through design solutions.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The choice of flooring is an important consideration in museums; their popularity brings a high volume of foot traffic, and museum spaces have a wide range of flooring needs. This course discusses how recycled rubber flooring is a good choice for museums because of its sustainability, durability, low maintenance requirements, performance attributes, and wide variety of design options.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Restrooms and other plumbing applications must comply with accessibility regulations, but do you know exactly how to do that? This course is a handy reference that explains what codes and regulations you must satisfy, when those requirements apply to new construction and alterations, and how to select and install fixtures to meet accessibility standards and the requirements of the LEED® v5 for Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Waterborne pathogens in healthcare facilities are a significant source of hospital-acquired infections (HAIs) that cause thousands of deaths every year and billions of dollars in direct healthcare costs. This course will familiarize you with waterborne pathogens found in healthcare water systems, the technical standards that manage the risk of outbreaks, and the components of a water management program (WMP). Finally, we will review the characteristics of plumbing fixtures designed to deter pathogen growth.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Architects, interior designers, plumbers, and engineers play a vital role in creating accessible, safe, functional, and aesthetically appealing bathing spaces. With growing demand and stricter regulations, accessibility must be more than just compliance; it must enhance safety, dignity, and usability. This course equips professionals to balance ADA, ANSI, and residential best practices, ensuring projects meet both legal standards and real-world needs.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 15 minutes ) 

    Policies targeting the reduction of carbon emissions associated with building products require the disclosure of embodied carbon data to inform those policies and verify whether reduction targets or incentive requirements have been met. This course aims to provide a guide to collecting high-quality embodied carbon data.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Healthcare facilities are striving to meet the needs of all patients and caregivers by offering healthy, safe, and inclusive spaces that can be repurposed quickly if needed. This course reviews innovations in plumbing design, such as vacuum plumbing and its applications, and explores how these design innovations support trending healthcare needs, including infection prevention, behavioral healthcare, and bariatric applications, and fulfill ADA requirements. Several case studies showcasing successful examples are also covered.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Cable railings are a beautifully minimalist way to meet safety requirements without obstructing the view. Learn how to assemble a commercial-grade cable railing with sophisticated fittings engineered to simplify installation, comply with building codes, and reduce overall labor costs.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Architectural finishes mimic the aesthetics and textures of natural materials without the cost, labor, weight, and maintenance challenges of finishes such as wood, stone, leather, and metals. This course discusses their performance characteristics, selection considerations, and proper installation techniques for interior and exterior commercial applications, including fire-rated assemblies and LEED®-certified projects.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The Americans with Disabilities Act (ADA) sets the minimum requirements for newly designed and constructed or renovated state and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities. Many projects must also follow the provisions of the 2017 version of ICC A117.1,  Standard for Accessible and Usable Buildings and Facilities . This course identifies the benefits of accessibility standards and the prescriptive requirements for accessible restrooms set by the ADA and ICC A117.1.

    Ask a Question
    SAVE FOR LATER

Displaying 1 - 25 of 73 results.

FIRST [1-25] [26-50] [51-73] NEXT LAST SHOW ALL