Architectural Institute of British Columbia
In the interest of the public, the Architectural Institute of British Columbia regulates the profession of architecture through a responsive regulatory framework.
Click to Learn More About the Architectural Institute of British Columbia
Visit www.aibc.ca and Join Now!
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s951064/www.aecdaily.com/course/968151
Personal and corporate security is a steadily increasing issue of concern, and more homes and businesses are installing gates to control who can enter or leave. Sliding cantilevered gates, with their wide range of design and operating options, are increasingly popular for these installations. This course outlines their advantages; the many ways they can be designed, built, and operated; and those aspects that make them safe, aesthetically appealing, and reliable. The course concludes with a series of illustrated sample installations.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091539
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1121597
Door systems are an integral part of educational facilities. This course discusses their importance in creating a safe and secure learning environment and explores the different types of doors, frames, and hardware components. Also covered are industry standards, compliance requirements for fire and life safety, accessibility, and security measures that enhance the safety of the door assembly. The course concludes with some practical applications and case studies in educational settings.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1099572/www.aecdaily.com/course/1122993
This course is designed to educate and raise awareness among landscapers and architects to assist them in making correct turfgrass selections for their projects. The focus is on warm-season sod turfgrasses suited for the southern and midsection tiers of the United States. The selection criteria and best practices for sodding and maintaining turfgrass are reviewed, along with an introduction to proprietary cultivars designed to offer improved aesthetics, greater tolerances, and fewer inputs.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/961744
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions . You will receive credit for taking only one of these courses.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1123455
The popularity of thin gauged porcelain tile has soared because of its large slab size, beauty, durability, sustainability, and versatility. These tiles are suitable for many environments, especially hospitality, institutional, and office applications. This course explores their many uses, their economic and environmental benefits, and proper installation techniques.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s425610/www.aecdaily.com/course/901840
It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s17445/www.aecdaily.com/course/1053011
The choice of flooring is an important consideration in museums; their popularity brings a high volume of foot traffic, and museum spaces have a wide range of flooring needs. This course discusses how recycled rubber flooring is a good choice for museums because of its sustainability, durability, low maintenance requirements, performance attributes, and wide variety of design options.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s456403/www.aecdaily.com/course/835024
Stairs are often a prominent feature or even the focal point of an architectural design project and play a vital role in creating an aesthetically pleasing interior atmosphere, or an exterior welcoming point to a residential, commercial, or industrial building. This course provides an overview of the many benefits of installing precast concrete stair treads and landings, how to detail and specify them, and how to address related building code, design, and construction requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s610566/www.aecdaily.com/course/857878
This presentation celebrates the value of incorporating artisanal, handcrafted fixtures and furnishings into a building’s design. Not only are these products unique, functional, and aesthetically appealing, but they can also establish a sense of connection with their maker. Many artisanal, handcrafted products are made using traditional techniques that have been passed down over time, often from generation to generation. And because many of these products are made from sustainable, recycled, or reclaimed materials that are locally available, they can help reduce the environmental impact of a new build. This course illustrates how sourcing artisan-made products for their projects can allow designers and builders to effect social, economic, and environmental change.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13048/www.aecdaily.com/course/1127123
Urbanization and increasing land costs creating a tight housing market are driving densification and multifamily residential development. There is increased interest in midrise timber construction due to the 2021 International Building Code®, which permits mass timber buildings up to 18 stories high. This course discusses current IBC® requirements for the fire design of wood structural elements in Type III and Type IV buildings. Learners will review the use of continuous rod tiedown systems for light wood frame shearwalls and uplift restraint for wood structures up to 6 stories.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s779980/www.aecdaily.com/course/899781
While architects and designers have many choices for specifying dynamic architectural surfaces in their projects, the result of using photography in such applications has historically presented challenges. This course explores typical digital images used in glass installations, gigapixel photography, guidelines for glass transparency, and the impacts of luminosity and reflectivity. Finally, it looks at potential applications for gigapixel images in large- or small-scale architectural surfaces.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1119498
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/978473
Highly customizable electric heating solutions can provide either the main or supplemental heat for most indoor and outdoor spaces. Such solutions can harmonize beautifully with every architectural context and building configuration while addressing the full range of health, safety, comfort, and energy efficiency issues facing contemporary designers. This course examines the many supplemental electric heating solutions and devices available, their capabilities and configuration options, and how they can be customized to suit every unique architectural and engineering demand. It concludes with several illustrated cases.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1085380/www.aecdaily.com/course/1111123
Seniors represent a rapidly growing segment of the population and are entitled to living spaces that promote their safety and wellness. This course emphasizes the importance of accessibility and universal design in meeting the diverse needs of users of all ages and abilities. Specifically, it explores the use of adjustable lavatories and salon sink systems in senior living residences and how they cater to the needs of residents and personal care workers. The course also covers relevant plumbing and electrical codes and standards.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/965090
Today’s buildings are evolving from independently functioning structures to intelligent buildings that interact with occupants and surrounding buildings. This trend has impacted the design, operation, and maintenance of data centers around the globe due to the increased demand for data and digital communication and has resulted in more high-performance data centers. This presentation addresses the specific needs of data centers and presents high-performance design solutions that support sustainable design.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/852630
Concrete is one of the most widely used building materials throughout the world, and as such, it is in everyone’s best interest to consider more sustainable options. This course provides an overview of the properties of slag cement. Discussion topics include benefits, effects on plastics and hardened concrete, environmental profile including life cycle analysis (LCA) and environmental product declarations (EPDs), and various slag cement applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s738249/www.aecdaily.com/course/877574
Play and music are both essential parts of our lives. When we can combine music and play together in a fun and engaging space, the benefits are numerous, no matter your age. This course discusses why play and music education perform such a critical role in the development of happy, healthy children. We'll discuss the copious amounts of research that tell us that music education has real-life benefits, such as increased IQ, language development, and social engagement, and the role music plays within multiple therapies for the elderly and those suffering from mental illnesses. The course finishes with an overview of how to design musical play spaces for safety and inclusivity.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1359/www.aecdaily.com/course/881285
Gate and fencing systems can be both functional and decorative. This course illustrates how architectural gate and fencing systems can be designed to meet modern security and design requirements while harmonizing with their surrounding environment. Fencing and gate systems are discussed in terms of their composition, materials, coatings, finishes, and performance in interior and exterior applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s522670/www.aecdaily.com/course/992394
Building systems can be enhanced by incorporating reflective insulation or radiant barriers into the building envelope. With effective insulation, heat transfer is reduced, resulting in less summer heat gain, and less winter heat loss. This course explains common and effective uses for reflective insulation and radiant barriers in a wide range of construction and building applications and demonstrates how these systems reduce energy usage, increase the lifespan of the mechanical equipment for heating and cooling, and reduce maintenance requirements and frequency of replacement.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1072132/www.aecdaily.com/course/1091959
Well-designed and detailed skylight systems can significantly improve both building and occupant performance. This course explores the benefits, techniques, and importance of daylighting systems that utilize high-performance skylights to optimize daylighting benefits, avoid negative impacts, and contribute positively to building, occupant, and envelope performance. It examines how daylighting with skylights can help meet the requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL v2 Building Standard™.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s6403/www.aecdaily.com/course/1080220
Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation.
This course is one of two identical courses titled Water Conservation: Initiatives and Standards . You will receive credit for taking only one of these courses.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s729880/www.aecdaily.com/course/1072597
Infrared patio heaters sustainably increase safety and comfort in outdoor entertaining areas. There are many variables in creating ambient warmth, and the effectiveness and cost of heating an outdoor space depend on the design of the selected heating option. This course looks at the available outdoor heating options and their sustainability profiles, focusing on the types, color choices, mounting methods, and control options of electric infrared heaters. It includes a review of the steps required to select the best solution.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1010278
Concrete products such as precast pieces, pavers, and terrazzo have long provided builders with a flexible range of options for their projects. Beyond their versatility, these concrete products are highly sustainable, thanks to their ability to be recycled, low carbon footprint, and long life span.