Due to their durability, low operational cost, and sustainability, metal roofs are gaining popularity in both commercial and residential markets. Owner expectations for this product family have increased as well and now include heightened aesthetics and long-term performance. While metal roofing systems are certainly up to these challenges, when they fail, the results are costly. Consequently, it is imperative designers have full knowledge of metal roof design and detailing. This course covers the top ten problems metal roof designers face and describes how these problems can be prevented through proper design.
Approximately 1 hour, 15 minutes. Delivered online, at your own pace.
Presented by Brian Gardiner FRCI, RRC, CCS and Charlie Smith on behalf of McElroy Metal. View the McElroy Metal, Inc. Privacy Policy
Name: Brian Gardiner FRCI, RRC, CCS and Charlie Smith
Title: Brian Gardiner-Roof Consultant and Charlie Smith-National Recover Manager, McElroy Metal
Background:
Brian Gardiner has practiced roof consulting for over 30 years. He is a past director of both RCI, Inc. Region IV (1995-98) and the Building Envelope Institute, Inc. (2005-06). Brian has presented numerous metal roofing-related seminars for RCI, Inc. and other associations. He has specified and provided detail drawings on millions of square feet of metal roofing.
Charlie Smith is widely recognized as the industry’s foremost authority on re-cover systems utilizing metal roofing. Charlie holds several patents in the re-cover field, including both metal-over-metal and metal-over-shingle solutions. As an industry leader, Charlie recently co-wrote the new RCI metal roofing course with Brian Gardiner, who is a frequent presenter at RCI and other roofing industry events.
Charlie Smith founded Architectural Building Components in 1989 when he purchased the equipment of a small metal roofing manufacturing business based in Houston, Texas. Over the next 23 years, the company grew into an industry-leading metal roofing and wall system solution provider, specializing in the use of metal to re-cover existing low-slope roofs. In 2012, Architectural Building Components became a part of McElroy Metal, which enabled Charlie to focus on educational and product development efforts to help the roofing industry design creative solutions with metal.
This course is registered with: 28 Industry Association(s)
American Institute of Architects (AIA)
Course Number/ID: AEC1587-01:1
Approval ID: AEC1587-01:1
AIA/CES Learning units: 1.25
AIA approved course. This course qualifies for 1.25 LU/HSW Hour.
AEC Daily reports Learning Units on members' behalf.
Health, Safety, and Welfare (HSW)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Hours: 1.25
This course qualifies for HSW.
American Construction Inspectors Association (ACIA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Credits: 1.25
This course is approved for ACIA RCI CEUs. This course qualifies for HSW.
ACIA members self-report to ACIA by submitting their certificate of completion to ACIA for RCI renewal.
American Institute of Building Design (AIBD)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CE Hours: 1.25
AIBD approved course. This course qualifies for HSW.
AEC Daily reports Learning Units on members’ behalf.
American Institute of Constructors (AIC)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CPD Hours: 1.25
AIC approved course.
Hours must be self-reported to the AIC.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
PDHs: 1.25
Course meets ASHRAE guidelines for acceptable Professional Development Hours (PDHs) for recertification purposes. Ensure this course content is related to ASHRAE certification practice area: BEAP, BEMP, CPMP, HBDP, HFDP & OPMP.
Building Owners and Managers Institute - Continuing Professional Development (BOMI CPD)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CPD Hours: 1.25
BOMI approved course. This program qualifies for BOMI Institute Continuing Professional Development (CPD) credit for RPA, FMA, and/or SMA graduates. This course qualifies for HSW.
Members must self-report CPD hours.
California Council for Interior Design Certification (CCIDC)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CE Hours: 1.25
CCIDC approved course. This course qualifies for HSW.
Members must self-report CEU hours to CCIDC.
Florida Board of Professional Engineers (FBPE)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Provider Number: 0004278, Sequence Number 0000031
PDHs: 1.25
FBPE approved provider.
International Code Council (ICC)
Course Number/ID: AEC1587-01:1
Approval ID: 14283
Provider Number: 1293
CEU: 0.12
AEC Daily is an ICC Preferred Provider. This course qualifies for ICC Certification Renewal.
The International Association of Certified Home Inspectors (InterNACHI)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CE Hours: 1.25
InterNACHI approved course. This course qualifies for HSW.
Members must self-report CE hours to InterNACHI.
The Louisiana State Board of Architectural Examiners (LSBAE)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Hours: 1.25
LSBAE approved course.
Credit hours will be reported through cebroker.com
National Association of Home Builders (NAHB)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CE Hours: 1.25
This program meets NAHB's continuing education requirements for one or more of the following designations: Certified Graduate Associate (CGA), Certified Graduate Builder (CGB), Certified Graduate Remodeler (CGR), Certified Green Professional (CGP), Graduate Master Builder (GMB), Graduate Master Remodeler (GMR), Certified Aging-In-Place Specialist (CAPS)
National Association of the Remodeling Industry (NARI)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
CEUs: 0.13
NARI approved course.
0.1 CEU toward certification renewals. 1 Hour toward certification application.
Registered Continuing Education Program (RCEP)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
PDH: 1.25
AEC Daily is an RCEP-approved continuing education provider.
Credit earned on completion of this program will be reported to RCEP.
Rocky Mountain Masonry Institute (RMMI)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Credit Per Hour: 1.25
This is a RMMI approved course.
RMMI will confirm certification credit upon receipt of Certificate of Completion (members must self-report).
The Alberta Association of Architects (AAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Provider No.: A-002
Learning hours: 1.25
This course is approved as a Structured Course.
AAA Members must self-report their learning hours to AAA.
Architects' Association of New Brunswick (AANB)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning Hours: 1.25
This course may qualify for either core/structured or self-directed/non-structured learning hours.
Architects Association of Prince Edward Island (AAPEI)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning hours: 1.25
This course is approved as a Core Learning Activity.
Members must self-record their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
Architectural Institute of British Columbia (AIBC)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning units: 1.25
AIBC members may self-report this learning activity for consideration of AIBC learning units.
Canadian Association of Home and Property Inspectors (CAHPI)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
MRC Hours 1.25
CAHPI approved course, MRC Hours.
Members must self-report MRC hours to CAHPI.
Construction Specifications Canada (CSC)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
PDE Hours: 1.25
CSC approved course. This course qualifies for HSW.
Members must self-report PDE hours to CSC.
Newfoundland & Labrador Association of Architects (NLAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning units: 1.25
This course is approved as a core course.
Members must self-report LUs through the MCET National Con Ed reporting website. (www.architranscripts.ca/default.htm)
Northwest Territories Association of Architects (NWTAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning Hours: 1.25
This course is approved as a Structured course.
Members must self-report Learning Hours through the National Con Ed reporting website at https://www.raic.org/transcripts/default.htm
The Nova Scotia Association of Architects (NSAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Learning Hours: 1.25
This course may qualify as a Core/Structured Activity.
Ontario Association of Architects (OAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Hours: 1.25
This course may apply to both OAA structured and unstructured learning as long as it addresses the required subject matter topics.
Members must self-report activity to OAA and retain your Certificate of Completion.
Ordre des architectes du Québec (OAQ)
Course Number/ID: AEC1587:1 / Cours # AEC1587:1
Approval ID: AEC1587:1 / Cours # AEC1587:1
Hours / Nombre d’heures: 1.25
This course qualifies for self-directed learning activity with the OAQ. / Ce cours est reconnu par l’OAQ comme activité d’auto-apprentissage.
Members must self-report hours to OAQ. / Les membres doivent rapporter eux-mêmes leurs heures à l'OAQ.
Saskatchewan Association of Architects (SAA)
Course Number/ID: AEC1587:1
Approval ID: AEC1587:1
Provider No.: 1036
Learning units: 1.25
This course is approved as a core course.
Members must self-report LUs through the RAIC National Con Ed reporting website. http://raic.org/transcripts.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s9525/www.aecdaily.com/course/946893
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
Cookie Settings