There is an extremely wide array of coated or composite fabrics available on the market, each type formulated for specific uses and with different levels of performance and quality. To assist in the decision-making process, standards have been developed to show product performance, facilitate quality control, and assure designers that the product they are specifying is suitable for normal commercial use. This course briefly outlines the history, properties, and uses of coated fabrics, the intent and content of one coated fabric standard, and the testing protocols that support it.
Approximately 1 hour, 15 minutes. Delivered online, at your own pace.
Presented by Ronnie Bell on behalf of Omnova Solutions. View the Chemical Fabrics and Film Association Privacy Policy
Name: Ronnie Bell
Title: Technical Manager, Coated Fabrics, Omnova Solutions
Background: Ronnie Bell is a Coated Fabrics Technical Manager for OMNOVA Solutions. He has more than 40 years of experience in the coated fabrics and wallcovering industry and has held positions in manufacturing, quality assurance, and product engineering. Over the past twelve years, Ronnie has been awarded eleven OMNOVA Technology Awards. These awards recognize his expertise in product innovation, new product commercialization, and marketing technology innovation. His many achievements over the years include the formulation of a specialty base for digital wall murals and the creation of a chemical resistant soft cast coated fabric designed specifically for the healthcare market. Ronnie continues to play a major role in new product development and innovation. He is also involved in key industry organizations, serving as President of the Chemical Fabrics and Film Association, and Chairman of its Performance Products Division.
This course is ACTIVELY registered with 29 industry association(s). Show CURRENT course approvals Hide CURRENT course approvals
American Institute of Architects (AIA)
Course Number/ID: AEC1482-01:1
Approval ID: AEC1482-01:1
AIA/CES Learning units: 1.25
AIA approved course. This course qualifies for 1.25 LU/HSW Hour.
AEC Daily reports Learning Units on members' behalf.
Health, Safety, and Welfare (HSW)
Course Number/ID: AEC1482
Approval ID: AEC1482
Hours: 1.25
This course qualifies for HSW.
American Construction Inspectors Association (ACIA)
Course Number/ID: AEC1482-01:1
Approval ID: AEC1482-01:1
Credits: 1.25
This course is approved for ACIA RCI CEUs. This course qualifies for HSW.
ACIA members self-report to ACIA by submitting their certificate of completion to ACIA for RCI renewal.
American Institute of Building Design (AIBD)
Course Number/ID: AEC1482
Approval ID: AEC1482
CE Hours: 1.25
AIBD approved course. This course qualifies for HSW.
AEC Daily reports Learning Units on members’ behalf.
American Institute of Constructors (AIC)
Course Number/ID: AEC1482
Approval ID: AEC1482
CPD Hours: 1.25
AIC approved course.
Hours must be self-reported to the AIC.
Building Owners and Managers Institute - Continuing Professional Development (BOMI CPD)
Course Number/ID: AEC1482
Approval ID: AEC1482
CPD Hours: 1.25
BOMI approved course. This program qualifies for BOMI Institute Continuing Professional Development (CPD) credit for RPA, FMA, and/or SMA graduates. This course qualifies for HSW.
Members must self-report CPD hours.
California Council for Interior Design Certification (CCIDC)
Course Number/ID: AEC1482
Approval ID: AEC1482
CE Hours: 1
CCIDC approved course. This course qualifies for HSW.
Members must self-report CEU hours to CCIDC.
Decorator and Designers Association (DDA)
Course Number/ID: AEC1482:1
Approval ID: AEC1482:1
CEUs: 0.1
Members must self-report CEUs to DDA.
DDA will accept all IDCEC-approved courses.
Florida Board of Professional Engineers (FBPE)
Course Number/ID: AEC1482
Approval ID: AEC1482
Provider Number: 0004278, Sequence Number 0000031
PDHs: 1.25
FBPE approved provider.
International Design Continuing Education Council Inc. (IDCEC)
Course Number/ID: AEC1482-01:1
Approval ID: CC-111661R2-1000
CEUs: 0.1
HSW
This CEU is registered with the International Design Continuing Education Council Inc. (IDCEC) for continuing education credits. This credit will be accepted by the American Society of Interior Designers (ASID), International Interior Designers Association (IIDA) and Interior Designers of Canada (IDC). The content included is not deemed or construed to be an approval or endorsement by IDCEC of any material or construction or any method or manner of handling, using, distributing or dealing in any material or product. Questions related to specific materials, methods and services should be directed to the instructor or provider. This program is registered for CEUs (continuing education credits).
The International Association of Certified Home Inspectors (InterNACHI)
Course Number/ID: AEC1482
Approval ID: AEC1482
CE Hours: 1.25
InterNACHI approved course. This course qualifies for HSW.
Members must self-report CE hours to InterNACHI.
The Louisiana State Board of Architectural Examiners (LSBAE)
Course Number/ID: AEC1482
Approval ID: AEC1482
Hours: 1.25
LSBAE approved course.
Credit hours will be reported through cebroker.com
Louisiana State Board of Examiners of Interior Designers (LSBID)
Course Number/ID: AEC1482-01:1
Approval ID: AEC1482-01:1
CEU 0.1
This course qualifies for HSW.
LSBID approved course. Members self-report their credit to the Louisiana State Board of Interior Designers.
National Association of Home Builders (NAHB)
Course Number/ID: AEC1482
Approval ID: AEC1482
CE Hours: 1.25
This program meets NAHB's continuing education requirements for one or more of the following designations: Certified Graduate Associate (CGA), Certified Graduate Builder (CGB), Certified Graduate Remodeler (CGR), Certified Green Professional (CGP), Graduate Master Builder (GMB), Graduate Master Remodeler (GMR), Certified Aging-In-Place Specialist (CAPS)
National Association of the Remodeling Industry (NARI)
Course Number/ID: AEC1482
Approval ID: AEC1482
CEUs: 0.1
NARI approved course.
0.1 CEU toward certification renewals. 1 Hour toward certification application.
National Kitchen & Bath Association (NKBA)
Course Number/ID: AEC1482
Approval ID: AEC1482
CEUs: 0.1
NKBA approved course.
NKBA members must self-report CEUs to NKBA.
Registered Continuing Education Program (RCEP)
Course Number/ID: AEC1482-01:1
Approval ID: 162547
PDH: 1.25
AEC Daily is an RCEP-approved continuing education provider.
Credit earned on completion of this program will be reported to RCEP.
Rocky Mountain Masonry Institute (RMMI)
Course Number/ID: AEC1482
Approval ID: AEC1482
Credit Per Hour: 1.25
This is a RMMI approved course.
RMMI will confirm certification credit upon receipt of Certificate of Completion (members must self-report).
The Alberta Association of Architects (AAA)
Course Number/ID: AEC1482
Approval ID: AEC1482
Provider No.: A-002
Learning hours: 1.25
This course is approved as a Structured Course.
AAA Members must self-report their learning hours to AAA.
AANB + ALBNL + NSAA (AANB + ALBNL + NSAA)
Course Number/ID: AEC1482-01:1
Approval ID: AEC1482-01:1
Core Hours: 1.25
This course is EPP approved.
Members must self-report their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts
Architects Association of Prince Edward Island (AAPEI)
Course Number/ID: AEC1482
Approval ID: AEC1482
Learning hours: 1.25
This course is approved as a Core Learning Activity.
Members must self-record their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
Architectural Institute of British Columbia (AIBC)
Course Number/ID: AEC1482
Approval ID: AEC1482
Learning units: 1.25
AIBC members may self-report this learning activity for consideration of AIBC learning units.
Canadian Association of Home and Property Inspectors (CAHPI)
Course Number/ID: AEC1482
Approval ID: AEC1482
MRC Hours 1.25
CAHPI approved course, MRC Hours.
Members must self-report MRC hours to CAHPI.
Construction Specifications Canada (CSC)
Course Number/ID: AEC1482
Approval ID: AEC1482
PDE Hours: 1.25
CSC approved course. This course qualifies for HSW.
Members must self-report PDE hours to CSC.
Newfoundland & Labrador Association of Architects (NLAA)
Course Number/ID: AEC1482
Approval ID: AEC1482
Learning units: 1.25
This course is approved as a core course.
Members must self-report LUs through the MCET National Con Ed reporting website. (www.architranscripts.ca/default.htm)
Northwest Territories Association of Architects (NWTAA)
Course Number/ID: AEC1482
Approval ID: AEC1482
Learning Hours: 1.25
This course is approved as a Structured course.
Members must self-report Learning Hours through the National Con Ed reporting website at https://www.raic.org/transcripts/default.htm
Ontario Association of Architects (OAA)
Course Number/ID: AEC1482
Approval ID: AEC1482
Hours: 1.25
This course may apply to both OAA structured and unstructured learning as long as it addresses the required subject matter topics.
Members must self-report activity to OAA and retain your Certificate of Completion.
Ordre des architectes du Québec (OAQ)
Course Number/ID: AEC1482 / Cours # AEC1482
Approval ID: AEC1482 / Cours # AEC1482
Hours / Nombre d’heures: 1.25
This course qualifies for self-directed learning activity with the OAQ. / Ce cours est reconnu par l’OAQ comme activité d’auto-apprentissage.
Members must self-report hours to OAQ. / Les membres doivent rapporter eux-mêmes leurs heures à l'OAQ.
Saskatchewan Association of Architects (SAA)
Course Number/ID: AEC1482
Approval ID: AEC1482
Provider No.: 1036
Learning units: 1.25
This course is approved as a core course.
Members must self-report LUs through the RAIC National Con Ed reporting website. http://raic.org/transcripts.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s390008/www.aecdaily.com/course/917446
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
Cookie Settings