Architectural Institute of British Columbia
Architectural Institute of British Columbia - www.aibc.ca
Displaying 526 - 550 of 581 results.
FIRST PREV [476-500] [501-525] [526-550] [551-575] [576-581] NEXT LAST
Currently, buildings are the single biggest contributor to GHG emissions, accounting for roughly half of all energy consumption in the U.S. and globally. It is crucial to reduce this level of consumption by including high-performance envelope strategies such as shading systems in all new building designs. In this course, we look at shading systems, examine shading and design strategies, and learn tips for successful selection and design.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/894516
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation.
This course is one of two identical courses titled Water Conservation: Initiatives and Standards. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s6403/www.aecdaily.com/course/1080220
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today’s modern metal roof panel coatings are designed to be low friction in order to self-clean. However, when snow and ice accumulate on the roof, their rapid release causes countless personal injuries, millions of dollars in property damage and liability claims, and business disruptions worldwide. This course provides an overview of snow retention systems that protect against these dangers. Information about components of both pad and bar styles, features, installation, and layout are presented.
https://redirect.aecdaily.com/s18890/www.aecdaily.com/course/592377
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The planet is currently in a water scarcity crisis, which is significantly affected by toilet water usage. This course examines the current plumbing codes, standards, and regulations that address toilet water usage, the need for and benefits of going beyond current standards, and the goals of a variety of beyond-the-code voluntary standards and rating systems, such as LEED v4 BD+C and ICC 700 National Green Building Standard®. It explains the various types of low-flow and ultra-low-flow toilets, their pros and cons, and their selection criteria. It concludes with a sampling of successful cost- and water-saving installations.
https://redirect.aecdaily.com/s10412/www.aecdaily.com/course/983256
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The growth of EV (electric vehicle) adoption is accelerating and the behavior of EV drivers is increasing the demand for electric vehicle charging stations. This education course explains the different types of charging available and their suitable applications, and discusses the planning and installation considerations for electric vehicle supply equipment (EVSE).
https://redirect.aecdaily.com/s701406/www.aecdaily.com/course/858594
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.
https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/926173
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Keeping bathrooms and kitchens clean and hygienic is essential to health and well-being but can be challenging in busy family homes. This course introduces some basic principles of home hygiene, provides an overview of the most effective cleaning strategies, and shows how contemporary kitchen and bathroom technology and design innovations can make hygienic cleaning substantially easier. Technologies discussed include touchless activation, intelligent toilets, bidet seats, and antimicrobial surfaces.
https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/929417
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Surface preparation is critical for high-performing, long-lasting flooring. Learn about the latest innovations and installation techniques in surface preparation that prevent floor damage while mitigating moisture and noise.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1067126
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
While natural wood has traditionally been viewed as an ideal material for decking boards and tiles, wood-plastic composite (WPC) has emerged as a durable, easy-to-maintain, and sustainable alternative. This course provides insights into the advantages of composite decking, especially fully capped products, and explores topics including its environmental benefits; contribution to occupant wellness and safety; resistance to fading, staining, and other potential defects that decking experiences; various applications; and attractive aesthetics.
https://redirect.aecdaily.com/s951401/www.aecdaily.com/course/1094326
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As the population grows, urban centers are becoming denser and land more valuable. Architects are looking for parking solutions that provide space-saving benefits to high-density residential and commercial developments. This course discusses the performance of mechanical parking systems, also known as automated parking or high-density parking (HDP), and how they reduce space required for vehicle storage, increase safety, and minimize the environmental impact of parking vehicles. Specifications and installation are also examined.
https://redirect.aecdaily.com/s1070282/www.aecdaily.com/course/1106778
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Color is often used functionally across many design elements; this can also be done with concrete by simply dosing standard concrete mix designs with pigment. Using pigment, concrete can be transformed from a plain, common material into a beautiful, sustainable, and enduring building element. Adding pigments to concrete elevates a project's quality and impact. This course presents basic knowledge of how concrete pigments are manufactured and how they are measured and dispensed to produce the desired color hue and intensity capable of elevating a project to the next level.
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/938725
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Interlocking concrete pavers (ICP) have the ability to spread applied loads via the interlock between each unit. This means that the surface does not respond structurally as single pavers but as a composite paved surface. This structural characteristic of ICP allows the design method for these pavements to be based on flexible pavement design. In this course, we examine the ASCE and ICPI structural design methods for ICP and review examples using different soil strengths/stiffnesses and traffic uses. Finally, we survey the design and construction support material and software available from the Interlocking Concrete Pavement Institute.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/802273
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The term glass doors can be a good catchall for a category that plays a significant role in commercial office applications. From frameless glass doors to simple entry doors with narrow, medium, or wide stiles to demountable glass wall systems, selecting the correct hardware can be challenging and impacts ADA compliance and occupant safety and comfort. This course explores the available styles, compares locally manufactured hardware to imported sets, and discusses selection considerations and specification criteria.
https://redirect.aecdaily.com/s521/www.aecdaily.com/course/1082326
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Data centers, some consuming up to 200X the energy of comparably sized office space, are rapidly evolving in numbers, size, location, and energy demands. These facilities are frequently becoming integrated into other buildings and the purview of the architect. This course reviews the data center impact on building design and then identifies and describes the most effective design approaches and fitments that building designers can employ to control their capital and operating costs, spatial needs, and energy consumption.
https://redirect.aecdaily.com/s728117/www.aecdaily.com/course/853552
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Sustainable building envelopes demand high performance from and proper installation of continuous insulation and air, water, and vapor control layers. What happens when thousands of holes are made in these materials as they are installed with blind fasteners, one layer on top of another by different subcontractors? Sequencing issues can generally not be avoided; instead, this course focuses on self-sealing fasteners as a solution to avoid damage and thermal bridging in insulation and control layers. Various fasteners and anchors are described, and recommendations are presented for how to specify and what testing data to look for.
https://redirect.aecdaily.com/s1075056/www.aecdaily.com/course/1110425
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Structural laminated decking allows the beauty of the wood structure to be exposed, creating a unique architectural experience for its occupants. Aesthetics, strength, and durability are combined in one engineered product. Structural laminated wood decking is an environmentally sustainable and cost-effective alternative to solid timber and other roof systems. This course discusses the characteristics of laminated wood decking and reviews recommended design, specification, and installation practices.
https://redirect.aecdaily.com/s4887/www.aecdaily.com/course/896266
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The demand for noise control is increasing due to a growing population, greater expectations of sound privacy, and an increasing awareness of the harmful effects of noise pollution. Noise control is a key component of design because it affects occupant privacy and well-being. This course reviews the design of floor-ceiling assemblies to improve acoustics and occupant wellness.
https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/1068347
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The variety of wheelchair lifts on the market can present a challenge to specifiers. Not only is there a wide range of design features, but also some lifts may not meet all ADA requirements for a given application. This course covers the features, codes, and regulatory requirements of vertical wheelchair lifts and the benefits of specifying a vertical wheelchair lift solution to both the user and the facility owner.
https://redirect.aecdaily.com/s508058/www.aecdaily.com/course/1019759
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Custom window products include a range of products, from truly one-of-a-kind fabrications to customizable components. This course takes a detailed look at what design options are available to the architect in premium and luxury window products. Installation and performance issues pertaining to large window combinations are also discussed, as well as recommended solutions and mitigation strategies for structural and water infiltration challenges.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/916187
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/958335
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Moisture and soil gas beneath concrete slabs can cause a myriad of problems in both residential and commercial applications. The causes and consequences of these problems are reviewed in this course, along with a discussion on the types and characteristics of under-slab water vapor and soil gas barriers.
https://redirect.aecdaily.com/s421150/www.aecdaily.com/course/925438
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Curved elements, such as walls, ceilings, columns, soffits, light covers, clouds, and arches have often been used to add interest to architectural designs. This course outlines conventional methods of framing curves in wood and steel, as well as new methods of framing using flexible track systems. Discussions include options for wall coverings and trims for curved surfaces.
https://redirect.aecdaily.com/s18206/www.aecdaily.com/course/920731
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
