National Association of the Remodeling Industry
National Association of the Remodeling Industry - www.nari.org
Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1056832
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Custom window products include a range of products, from truly one-of-a-kind fabrications to customizable components. This course takes a detailed look at what design options are available to the architect in premium and luxury window products. Installation and performance issues pertaining to large window combinations are also discussed, as well as recommended solutions and mitigation strategies for structural and water infiltration challenges.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/916187
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Electric vehicle (EV) charging stations are not created equal; they have different capabilities to accommodate the varying needs of EV drivers. Presented here are the types of EV charging stations and their suitable applications, followed by an in-depth discussion of DC fast charging solutions, their benefits, and charging station site planning and design considerations and guidelines.
https://redirect.aecdaily.com/s701406/www.aecdaily.com/course/913487
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.
https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Les consommateurs milléniaux sont déterminés à faire des choix d’achat durables sur le plan environnemental. Mais qu’est-ce qui rend un produit véritablement durable? Ce cours présente des données qui indiquent que les panneaux décoratifs en bois composite (TFL) et d’autres produits faits de résidus de fibre de bois font partie des matériaux de construction les plus durables sur le marché. Ce cours aborde la gestion des forêts, les propriétés qui font les panneaux décoratifs en bois composite (TFL) affichent un bilan climatique positif, l’efficacité associée au processus de fabrication des panneaux et les critères et processus associés à la certification environnementale.
https://redirect.aecdaily.com/s16445/www.aecdaily.com/course/955057
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Automated-shading systems are designed to maximize natural daylight, increase building energy efficiency, and ensure occupants have a comfortable environment with views to the outside. This course will explain how an automated shading system predicts, monitors, and responds to the daily microclimate surrounding a building to effectively manage daylight, solar-heat gain, occupant comfort levels, and energy use demands.
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/821308
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A well-designed queuing system not only offers structure, efficiency, safety, and accessibility but also can enhance the aesthetics and visual appeal of an environment. This course presents an overview of the important factors that need to be considered when designing and specifying public queuing and pedestrian flow systems to facilitate a positive and orderly waiting experience.
https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1004301
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Daylighting has traditionally been considered a functional way to bring natural light into building design. This course explores innovative applications of daylighting using various methods to deliver natural light into spaces and create visually appealing natural lighting as part of an overall design. It also examines daylighting strategies, considerations, and material options for successful project planning. By incorporating daylighting into projects, architects can create innovative environments that meet the sustainability goals of the building and the health, safety, and welfare needs of its occupants. Applicable credits and features in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2 are noted.
https://redirect.aecdaily.com/s1072115/www.aecdaily.com/course/1102478
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Hidden access covers blend utility access covers with the surface continuity of streetscape, hardscape, and landscape designs. This course reviews the functions, product types, and specification and installation considerations of hidden access cover solutions.
https://redirect.aecdaily.com/s890910/www.aecdaily.com/course/959066
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Sustainable design and green practices have raised consumer awareness about the potential dangers lurking in buildings and homes from products such as paints and coatings. Environmental sustainability has influenced architects and interior designers to approach their projects in ways that boost health, lower consumption of nonrenewable resources, and minimize waste. This course looks at the evolution of sustainable design, ways to measure the environmental impact of volatile organic compounds (VOCs), how paints and coatings can contribute toward satisfying LEED® credits, and how these products may play a role in designing for well-being.
https://redirect.aecdaily.com/s5089/www.aecdaily.com/course/1046540
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Fire safety is an important building enclosure design factor and needs to be addressed hand-in-hand with energy code requirements. NFPA 285 is a critical consideration with modern building assemblies incorporating combustible materials in noncombustible construction. This presentation reviews the history and scope of the NFPA 285 test standard and its adoption into the International Building Code® (IBC®). The compliance criteria are outlined, and triggers and contributors under the standard are identified. The course also reviews how the selection of building components such as insulation, air-/water-resistive barriers, and claddings affects the fire performance of an assembly, and solutions and common paths for compliance are presented.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091537
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Finding ways to improve the energy efficiency of buildings is a key focus of many codes organizations, designers, architects, and government groups. This course examines how the roof of a building—one of the few parts of a building envelope that undergoes periodic replacement—impacts energy efficiency. It also explores how roof design can be a key contributor to meeting both sustainability and energy operating cost goals.
https://redirect.aecdaily.com/s6300/www.aecdaily.com/course/794005
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Local vacuum networks are economical and sustainable systems that provide deep, stable, high-quality vacuum to a variety of lab environments. In this course, the environmental and performance benefits of local vacuum networks vs. central vacuum systems are explored, along with discussions on their components and design and installation considerations. Brief case studies are used to highlight the wide range of flexible, adaptable solutions supported by this strategy.
https://redirect.aecdaily.com/s579160/www.aecdaily.com/course/865704
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
ASCE 7-16, Minimum Design Loads and Associated Criteria for Buildings and Other Structures, provides several design alternatives that architects and engineers can use to reduce the potential for either partial or progressive collapse due to extraordinary events, whether natural or man-made. The minimum design load philosophy of the building code is at odds with some extraordinary events. ASCE 7, Section 2.5, “Load Combinations for Extraordinary Events,” which is incorporated into the IBC, covers such extraordinary events, stating: “Where required by the owner or applicable code, strength and stability shall be checked to ensure that structures are capable of withstanding the effects of extraordinary (i.e., low-probability) events, such as fires, explosions, and vehicular impact without disproportionate collapse.” There are several methods for achieving added safety in both expected and extraordinary events. These include performance-based design (for expected events) and methods for design against partial or progressive collapse (for extraordinary events). In this briefing, we’ll explore methods for design against partial or progressive collapse as found in ASCE 7, Section 1.4.6, “Extraordinary Loads and Events.”
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/971534
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete products such as precast pieces, pavers, and terrazzo have long provided builders with a flexible range of options for their projects. Beyond their versatility, these concrete products are highly sustainable, thanks to their ability to be recycled, low carbon footprint, and long life span.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1010278
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Fenestration openings are a critical component of a building envelope, especially in present-day sustainable, energy-efficient buildings. Building envelopes play an important role in controlling the movement of heat, bulk water, and water vapor. Designing fenestration openings for buildings that use continuous exterior insulation has a significant role in reducing thermal bridging and thus conserving energy. This course reviews the impact of exterior insulation on fenestration installation design. The course also explores solutions for a wide variety of wall system variations.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/947826
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Masonry is an ideal sustainable building construction material as it is extremely durable, recyclable, and reusable. It allows for extraordinary design versatility, so it can meet both aesthetic and functional requirements. This course looks at the design elements, components, and construction techniques that characterize sustainable masonry cavity wall building envelopes.
https://redirect.aecdaily.com/s367902/www.aecdaily.com/course/999984
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Stone is perhaps man's oldest, most durable, most reliable, and most beautiful building material. It is now possible to acquire all of its benefits without the need for heavy, thick, and expensive walls and foundations. This course explains how natural thin stone veneer can be economically utilized to protect and beautify commercial, institutional, and residential indoor and outdoor surfaces, the varying attributes of different stones, the numerous looks that can be achieved, and the standards that inform their selection, specification, and usage.
https://redirect.aecdaily.com/s671504/www.aecdaily.com/course/924622
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
There are a multitude of building envelope products used and a variety of methods taken for achieving energy and building code requirements. Understanding the different roles a product plays in the envelope simplifies its design. In this course, we take a look at the code requirements for buildings classified as IBC Types I–IV, paths to achieving compliance, and the number of roles polyisocyanurate insulation plays in meeting these requirements.
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/961147
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Sound control is a critical element in a building’s design. We all think of the walls, ceiling, and floor when discussing sound attenuation, but without the proper acoustic door, the sound-control goals in an acoustic plan may not be met. This course reviews healthy sound levels and how to test and identify target STC ratings. Also discussed are the elements of acoustic door assemblies and how they address fire ratings and ADA compliance, contribute to LEED® certification and green building, and provide security for classified files and electronic data.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/959390
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course explains and illustrates how high-performance, fully composite insulated sandwich wall panels can be detailed to achieve continuous insulation. It explores the pros, cons, and attributes of wythe connectors such as carbon fiber trusses as well as panel insulation options, manufacturing and testing procedures, and installation methods. It concludes by providing a comprehensive set of sample installations to illustrate the broad range of building types and appearances that can be created with insulated sandwich wall systems.
https://redirect.aecdaily.com/s789181/www.aecdaily.com/course/899785
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Research indicates that the quality of light directly affects the quality of life in a space; access to daylight and outdoor views promotes happiness and productivity. Reviewed in this course are the features of polycarbonate sheeting systems and how they contribute to energy-efficient daylighting design, as well as the overall health and well-being of the building occupants.
https://redirect.aecdaily.com/s20166/www.aecdaily.com/course/912597
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Recycled rubber flooring is an environmentally responsible material that outlasts many types of traditional commercial flooring products when exposed to normal foot traffic stress. Interior and exterior recycled rubber surfacing products are explored in terms of their sustainable design benefits and applications. The program includes discussions on rubber manufacturing, postconsumer tires, and green building certification systems.
https://redirect.aecdaily.com/s17445/www.aecdaily.com/course/540937
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Modern security bollards are highly engineered and tested devices that can withstand deliberate ramming by a 15,000 lb vehicle. Bollards are more than decorative boundary markers; they are an essential tool to protect lives and property. This course explains bollard crash testing standards, reviews the pros and cons of available bollard materials, and discusses steel bollard designs for low- and high-impact applications.
https://redirect.aecdaily.com/s892132/www.aecdaily.com/course/984450
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
