International Institute of Building Enclosure Consultants
International Institute of Building Enclosure Consultants - https://redirect.aecdaily.com/s18122/www.iibec.org
Displaying 26 - 50 of 108 results.
FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-108] NEXT LAST SHOW ALL
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/903336
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/808876
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Comprehensive site security design should balance managing traffic flow and preventing vehicular intrusion with enhancing the existing character of the site. This course presents FEMA’s guidance on risk assessment and layers of defense, vehicle impact test standards, bollard types, the precast concrete manufacturing process, barrier system design considerations, and incorporating precast concrete bollards and site furnishings into perimeter security design.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1056048
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Provides an overview of the noise issues associated with floor/ceiling assemblies of multi-family dwellings, as well as the factors that affect acoustical performance. Also presented is a review of the acoustical solutions that are available with a focus on sound mats with poured underlayment (SMPU) systems.
https://redirect.aecdaily.com/s608556/www.aecdaily.com/course/648415
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
All vapor retarders (VRs) are air barriers (ABs), but not all ABs are VRs. Wait, what? How can that be? This presentation provides the practical side to the AB/VR discussion and identifies common VRs and ABs, how they’re installed, and why AB/VR approaches vary according to the type of construction and building use.
https://redirect.aecdaily.com/s6300/www.aecdaily.com/course/1048057
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Rainscreen systems are designed to prevent moisture from infiltrating walls and weakening their structural integrity. Multicomponent backup wall systems have traditionally been used for commercial projects but have drawbacks ranging from creating plenty of waste to producing design challenges. The alternative of insulated metal panel barrier wall systems offers many advantages that are discussed in this course, including economic and environmental benefits, easier installation, and a fresh, modern look.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/950624
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Due to advancements in architectural decorative glass technology, the number of design options available to help designers and architects achieve the specific aesthetics and performance requirements they desire has dramatically increased. This course provides a review of architectural decorative glass including product options, applications, features, and specification considerations. Also discussed is how decorative glass can contribute to sustainable design and LEED® initiatives.
https://redirect.aecdaily.com/s661112/www.aecdaily.com/course/880724
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/815408
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/917631
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/961744
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Roofing is one of the most common renovation projects on commercial buildings. Upgrading a roof assembly to meet current building standards provides an opportunity to save energy and maintain the necessary fire and structural performance. This course reviews the code requirements for commercial reroofing and discusses how reroofing can improve a building’s energy efficiency.
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/1002626
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Beyond aesthetics, ventilated façades and cladding systems provide added wind load absorption, moisture protection, and insulation properties, resulting in prolonged building durability and sustainability. This course examines how these systems benefit occupant well-being by mitigating exterior noise transmission, offer significant building operating energy savings from decreased HVAC demands, and increase occupant comfort by regulating interior temperatures. Mechanical and chemical adhesive attachment is also examined, focusing on the adhesive’s ability to absorb wind-induced vibration as well as expansion and contraction from temperature and humidity changes. Several case studies are also discussed.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1048719
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In applications where wood may be exposed to moisture, insects, or fungal organisms, preservative-treated wood can ensure a project’s durability. This course reviews: the manufacturing process for pressure-treated wood; types of preservative treatments and the required levels of retention as dictated by the end-use application, desired service life, and exposure conditions; American Wood Protection Association (AWPA) Use Category standards; current issues concerning preserved wood in residential and commercial construction; and Best Management Practices (BMPs) for aquatic uses.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/794696
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Operable wall systems integrate the indoors and outdoors and define interior spaces, providing flexibility and additional usable area without increasing a building’s footprint. Occupants benefit from expansive daylighting and views as well as quick access to fresh air. This course describes the types of operable wall systems, how they contribute to sustainable design, and the various options and considerations for selecting the correct system.
https://redirect.aecdaily.com/s19829/www.aecdaily.com/course/886429
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The inherent properties of concrete masonry, including strength, durability, and fire safety, have been well documented, though a perception of high cost persists. Due to significant changes to codes and standards that increased the flexibility of concrete masonry structural design, this construction method may also offer cost-effective and energy-efficient alternative solutions. This course reviews changes to ASTM C90 and the masonry design standard and includes a discussion on the benefits and opportunities these requirements bring.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1009125
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The trend toward more sustainable, healthy, and energy-conserving enclosures has brought building science and moisture management to the forefront of daily conversation for professionals in the construction industry. In this course, we delve into the science behind current practices and explore the role of building envelopes, optimal wall assemblies, and enclosures in vapor, water, air, and thermal control.
https://redirect.aecdaily.com/s1002402/www.aecdaily.com/course/1036036
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/960872
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Standing seam metal roofing has been used successfully in the United States for centuries, and proper specification is key to realizing its intended performance. Examined here are: the factors driving the demand for standing seam metal roof and wall systems; standing seam panel basics; gauge and grade; oil canning; specification considerations; testing standards; and forming, delivery, storage, handling and warranty.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856363
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®).
https://redirect.aecdaily.com/s1041685/www.aecdaily.com/course/1048034
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines).
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/881135
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Masonry wall types have evolved from self-supporting mass walls to cavity walls and veneers that require wall ties or anchors. Over time, anchors can fail and masonry wall systems can become unstable and require repair. This course discusses how to recognize unstable façades, how retrofit anchors can be used to repair these instabilities, the different types of anchors available, and how to determine the proper repair procedure.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1012800
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/958335
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/826168
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
