The Nova Scotia Association of Architects
The Nova Scotia Association of Architects (NSAA) is a self-governing professional association established in 1932, and mandated by the Province of Nova Scotia under The Architects Act to regulate the practice of architecture in the province.
Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/808876
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.
https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Vinyl is strong and resistant to moisture and abrasion, and therefore is the most widely used plastic for building and construction. This course presents vinyl flooring and its manufacturing process, testing standards, and performance characteristics. The course discusses the environmental impacts of vinyl flooring throughout its life span and its contributions to meeting green building codes and standards.
https://redirect.aecdaily.com/s679669/www.aecdaily.com/course/892209
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today’s louvers not only are functional but also offer enhanced architectural design to the façade of many buildings. More than just a hole in a wall, louvers are responsible for reducing or eliminating water infiltration and offer protection from heavy storms and hurricanes. Different types of louvers and their applications are discussed in this course as well as specific terminology, AMCA/BSRIA testing procedures, and the Certified Ratings Program.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/887740
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In order to address tile installation difficulties effectively and avoid failures, designers and specifiers must maintain full awareness of current knowledge, practices, and products. This course reviews potentially problematic contemporary tile installation issues along with the industry guidance, methodologies, and products available to address them.
https://redirect.aecdaily.com/s692617/www.aecdaily.com/course/869237
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Local vacuum networks are economical and sustainable systems that provide deep, stable, high-quality vacuum to a variety of lab environments. In this course, the environmental and performance benefits of local vacuum networks vs. central vacuum systems are explored, along with discussions on their components and design and installation considerations. Brief case studies are used to highlight the wide range of flexible, adaptable solutions supported by this strategy.
https://redirect.aecdaily.com/s579160/www.aecdaily.com/course/865704
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Designers, building users, and managers are increasingly focused on building and occupant health as well as energy conservation. This course explores how mixed-mode (hybrid) ventilation systems address all these issues by improving the ratio of fresh air introduced into buildings while reducing energy needs and costs. It describes the benefits, elements, and workings of these systems and provides design guidance and illustrative case studies.
https://redirect.aecdaily.com/s19829/www.aecdaily.com/course/932660
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
While the bathroom was once a strictly utilitarian space, a growing trend among luxury consumers is to create a custom, spa-like wellness retreat right in the home. Surveys find that luxury consumers value functional and design excellence, uniqueness that reflects a creative side, and exceptional quality and value. This course examines the shower products available that help to create a personalized, multisensory wellness experience with beautifully designed pieces that meet water efficiency standards.
https://redirect.aecdaily.com/s8279/www.aecdaily.com/course/875279
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Energy codes at the federal, state, and local levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. Whether new or recently updated, energy codes play an essential role in the buildings we design, build, and ultimately live, work, and play in. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code®, with a focus on plug and lighting control strategies for energy efficiency.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1028895
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate, and other commercial settings.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/931279
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Mechanical vibration and structure-borne noise exist in all building environments. Depending on how severe the disturbance and how sensitive the equipment, the problems caused by the vibration or shock can be negligible or destructive. This course explains why, during the entire building design process, it is essential to consider what a building is being used for and the potential impact of vibration and structure-borne noise, not only from external sources but also from equipment running within the building.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/938800
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/960872
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course reviews the trends in outdoor amenity spaces in hospitality, commercial, and multifamily developments with a focus on the use of stainless steel cabinetry in outdoor kitchen design. Included are discussions on outdoor kitchen components, mobile food and beverage service carts, and the post and panel system developed for multifamily applications.
https://redirect.aecdaily.com/s591341/www.aecdaily.com/course/791836
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Ventilation grilles influence HVAC system performance but can pose aesthetic challenges for designers. Custom grilles made with modern fabrication techniques employ a variety of materials and finishes to create solutions that enhance and fully integrate with architectural interiors. This course discusses the basic mechanics of effective air distribution in buildings, performance characteristics of grilles, grille types, and custom design options.
https://redirect.aecdaily.com/s1608/www.aecdaily.com/course/903341
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
An energy recovery ventilator (ERV) system provides occupants with filtered, balanced, and tempered air within their living space. Airborne contaminants can be greatly reduced with ERV systems. This course provides knowledge about the need, use, design, and installation of ERVs in the modern dwelling unit and when retrofitting existing structures. The course also addresses the environmental advantages of sustainable and healthy solutions for indoor air quality.
https://redirect.aecdaily.com/s379346/www.aecdaily.com/course/945582
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/890369
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Fallingwater, named the best all-time work of architecture by AIA members in 1991, started experiencing problems shortly after construction. A novel structural system combined with constant interaction with water meant that in order to maintain this national treasure, major restoration would be required. This course reviews the issues experienced by the building and the path to restoration that was taken.
https://redirect.aecdaily.com/s11510/www.aecdaily.com/course/991068
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
“Sustainable” design isn’t just “environmental.” It’s design that works for and contributes to the health and welfare of all individuals as well as the planet, now and in the future. This course looks at hand dryers as part of sustainably designed restrooms and discusses how air knife hand dryers benefit the environment through energy efficiency, resource conservation, and waste reduction, and benefit all members of society by meeting ADA requirements and Universal Design principles.
https://redirect.aecdaily.com/s485236/www.aecdaily.com/course/656814
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
From home offices to gyms to entertaining, homes have become multifunctional spaces. The use of smart technology provides innovative options for people to control and manage their homes for comfort and well-being on a daily basis. Smart home technology allows people to customize their homes. This course discusses how smart technology can interconnect household spaces to increase comfort, cleanliness, and well-being.
https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/963191
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The US has the highest incarceration rate in the world, and with recidivism rates as high as 75% within five years, the prospects for released inmates are dim. There is no simple solution to these issues, but one approach is to focus on rehabilitation to help inmates reintegrate successfully into society upon release. This course looks at the role evidence-based building design can play in a rehabilitative environment that promotes healing, autonomy, and growth. Design strategies are presented with a focus on ADA-compliant, ligature-resistant plumbing products and water management systems that support a clean, safe, secure, rehabilitative environment.
https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/946684
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Electrical systems that deliver access to permanent power and enable device connectivity are critical components of the design and operation of high-performance buildings. Today’s mobile technology means people can connect and move freely between the indoors and outdoors, and integrate their social and work lives, anytime, anywhere. This course examines permanent outdoor power delivery offerings, including charging stations and in-ground power boxes, that support the growing demand for connectivity and data and audiovisual communications in outdoor spaces, and help to create an outdoor environment that promotes longer stays, stimulates creativity, and increases productivity.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/890052
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Originally developed to reduce solar heat gain from entering through a pane of glass, window films in today’s market provide UV protection, reduce glare, reduce fading, increase occupant comfort, offer safety and security, and yield energy savings. This course evaluates the performance of different types of solar control window films and offers daylighting strategies for commercial, retail, and residential building and architectural applications.
https://redirect.aecdaily.com/s614935/www.aecdaily.com/course/903662
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/895029
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
