Displaying 76 - 100 of 202 results.
FIRST PREV [26-50] [51-75] [76-100] [101-125] [126-150] NEXT LAST
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091539
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Lightweight, prefinished, and factory-fabricated insulated metal panels (IMPs) offer building owners a durable, cost-efficient, and easy-to-install roofing system that provides an air barrier, vapor barrier, and insulation all in one product. This course discusses the characteristics of IMPs and the installation process and explains why IMPs are ideally suited for pre-engineered and structural steel buildings. The role of IMPs in a building’s hygrothermal control layers and IMP code compliance are reviewed.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/778805
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Western red cedar's (WRC) aesthetic, economic, and environmental benefits are just some of the reasons why builders and designers are increasingly gravitating to this species of wood. Presented here are modern, historical, and cultural uses of western red cedar, as well as its performance characteristics, grade specification, and finishes. Also discussed are sustainable forest management practices and certification agencies, and how sustainably sourced wood can contribute to LEED® credits.
https://redirect.aecdaily.com/s917163/www.aecdaily.com/course/922669
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The 2022 Inflation Reduction Act shines a light on how low-carbon building material selection is one of the keys to reducing greenhouse gas emissions in the US. High-performance, sustainable products and thoughtful assemblies designed with the building life cycle in mind are critical to the future of our sustainable communities. This course provides a look at how low-carbon and sustainability considerations are activated from product to building design. Factors impacting a sustainable building life cycle are discussed to help architects and owners with building performance that meets the design intent not just on paper but also in use.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1065316
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As the market continues to transform the way sustainable buildings are designed, single-skin metal roof and siding products are at the forefront of contributing to healthier built environments. This course breaks down the material inputs and sustainable attributes of single-skin metal roof and siding panels and includes an overview of how the panels can contribute toward earning several LEED® for Building Design and Construction credits in v4.1.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/1020058
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The trend toward sustainable building design took on new dimensions during the pandemic and concurrent supply chain crisis. Coupled with the ongoing dilution of skilled labor in the construction trades, there emerged an increased urgency and opportunity to specify and install sustainable roofing systems. This course compares low-slope roofing materials in terms of reliability, sustainability, and financial benefits.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1065325
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Water intrusion creates a variety of problems for masonry structures, including freeze-thaw damage, chemical- and pollution-based attacks, efflorescence, calcium carbonate stains, and mold. This course reviews the application and specification considerations related to water repellents and how they can help to prevent these problems.
https://redirect.aecdaily.com/s11609/www.aecdaily.com/course/903638
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The modern aesthetic of metal facades is in high demand for applications ranging from education, healthcare, and office to residential and multistory mixed use. Recent high-profile fires have reinforced the importance of choosing the right metal cladding system that meets thermal performance requirements while not compromising life safety. This course compares various core materials and focuses on what the code requires for metal cladding in terms of fire performance testing and results and includes case studies from fire events around the globe.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/870419
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/917631
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Air barriers improve the health and comfort of building occupants, improve energy efficiency, and prevent premature degradation of materials, increasing the structure’s life cycle. A successful air and moisture barrier system means under-slab, below-grade, and above-grade systems must work together to provide a continuous barrier. This course looks at above-grade air barrier systems and their types and components. Continuity and compatibility, specification, and installation challenges are also considered.
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/962747
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
At their root, metal roofs and walls made from steel, copper, zinc, or aluminum have a lower environmental impact because of their ability to be recycled and reused. This course focuses on the green aspects of standing seam metal roofs, and in particular, their cool roof characteristics. Also addressed are the implications of heat islands, what constitutes construction of cool roofs/walls and how they work, some rules of thumb for understanding cool metal roofing, roof slope impacts on performance, and codes, ratings, and standards that apply to designing cool roofs/walls.
https://redirect.aecdaily.com/s935649/www.aecdaily.com/course/960004
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Masonry wall types have evolved from self-supporting mass walls to cavity walls and veneers that require wall ties or anchors. Over time, anchors can fail and masonry wall systems can become unstable and require repair. This course discusses how to recognize unstable façades, how retrofit anchors can be used to repair these instabilities, the different types of anchors available, and how to determine the proper repair procedure.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1012800
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Choosing the correct roofing materials is a critical first step for builders, architects, and designers as they construct a new building, and for facility managers who work with these professionals to remodel existing buildings. This program examines SBS modified bitumen roofing and underlayment systems and includes discussions on the properties of SBS modified bitumen membrane, applications, testing, codes and standards, and underlayments, and provides a comparison with other commercial roofing materials.
https://redirect.aecdaily.com/s498466/www.aecdaily.com/course/901875
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/808876
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course aims to educate learners about the chemistry of spray-applied polyurethane foam (SPF), its various applications in the construction industry, safe handling and installation, and its contribution to sustainable design. The advantages of using SPF are highlighted in terms of its benefits to energy conservation and fire safety. Its role as a high-performance air barrier that satisfies code and LEED® criteria and complies with various standards is also discussed.
https://redirect.aecdaily.com/s356556/www.aecdaily.com/course/1003714
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Due to their durability, low operational cost, and sustainability, metal roofs are gaining popularity in both commercial and residential markets. Owner expectations for this product family have increased as well and now include heightened aesthetics and long-term performance. While metal roofing systems are certainly up to these challenges, when they fail, the results are costly. Consequently, it is imperative designers have full knowledge of metal roof design and detailing. This course covers the top ten problems metal roof designers face and describes how these problems can be prevented through proper design.
https://redirect.aecdaily.com/s9525/www.aecdaily.com/course/946893
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
One of the more complicated issues today in building science is addressing moisture movement, since moisture can penetrate a building in several different ways and result in material degradation, air quality issues, and failure of the building enclosure. This course examines the ways moisture can enter a structure and discusses the role of different moisture control layers that, when correctly placed and installed, can prevent unwanted moisture infiltration.
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/953062
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course explores some of the different types of metal roof penetrations, concerns dealing with improper installation or failures, and associated details and installation practices to ensure a properly performing and long-lasting roof penetration.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/1031752
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/811766
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products.
https://redirect.aecdaily.com/s13250/www.aecdaily.com/course/909350
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/916307
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Synthetic roofing materials have been available in the market for more than a decade, providing a cost-effective, viable alternative to traditional slate and shake roofing systems. This course provides an overview of the features and benefits of slate and shake synthetic roofing products, including a discussion on the testing methods used to rate specific performance characteristics.
https://redirect.aecdaily.com/s424571/www.aecdaily.com/course/899116
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Cellulose insulation has been used successfully by builders and designers for hundreds of years to provide comfort and warmth. Today, builders and designers also consider sustainability principles, climate change, occupant health and wellness issues, energy conservation, and carbon sequestration. Advanced cellulose insulation addresses all those areas as well. This course explains its environmental benefits, including its carbon capture ability, how it improves occupant health and well-being, and its numerous high-performance thermal, acoustic, and fire-resistant attributes.
https://redirect.aecdaily.com/s379494/www.aecdaily.com/course/1067199
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The primary purpose of a roof is to provide shelter and protection; to do so effectively over the long term, proper drainage and ventilation are required. Presented here are the categories of metal roofing, the moisture- and noise-related issues associated with architectural metal roofs, the use of a three-dimensional drainage and ventilation mat as a solution to these issues, and best practices for incorporating a mat in metal and cedar roof assemblies.
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/985501
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
