National Association of the Remodeling Industry
National Association of the Remodeling Industry - www.nari.org
Displaying 101 - 125 of 575 results.
FIRST PREV [51-75] [76-100] [101-125] [126-150] [151-175] NEXT LAST
Commercial fenestration products including sectional doors, rolling sheet doors, and rolling steel doors can improve building performance and provide essential building/opening protection. This course discusses common door features, hardware, insulation, installation, and optional types of electric operators, and evaluates the performance criteria required for a specific dock or drive through opening.
https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/440742
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
While providing fresh air intake and exhaust, reducing noise, and keeping out unwanted water and debris, louvers can also provide architectural style to a building design. This course discusses the aesthetics, performance, and weather resistance features of a variety of louver designs from the basic to the extreme. A discussion about the industry standards and test protocols for louver performance is included.
https://redirect.aecdaily.com/s12454/www.aecdaily.com/course/900566
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Electric vehicles (EVs) are rapidly becoming ubiquitous. To serve them sufficiently, there must be a massive expansion of car charging options, and that infers that planners and designers must create those options and opportunities now. This course examines the current trends in, and predictions for, EV chargers, the various types and their attributes, where and how they might be installed for maximum effectiveness, and the programs and incentives that apply to both EVs and their charger requirements.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1067121
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The potential for scalding from point of use hot water affects all of us. While the very young and the very old are more susceptible, no one is immune from scalding danger. An understanding of the potential for scalding, as well as the physiology of burns from hot water, can guide our design choices and significantly reduce the danger to people using facilities that commonly supply hot water, such as lavatories, baths, and showers. This course discusses the potential for scalding, the physiology of burns due to hot water, and who is most susceptible. It also discusses the relevant codes and the fixtures available to designers that can help reduce scalding and burn potential.
https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/969656
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings.
https://redirect.aecdaily.com/s806330/www.aecdaily.com/course/827398
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Integrated fire and smoke door systems meet all life safety and compartmentalization requirements without sacrificing an architect’s vision. This course explains how multiple codes and standards apply to an opening, elevator lobby, and elevator shaft and discusses how integrated door systems provide building owners with a complete turnkey door system that uses components engineered to work as a unified whole.
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/1010555
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Bamboo is a versatile, strong material with a warm aesthetic that suits an array of interior design styles. This course looks at how bamboo is sustainably sourced to produce low-VOC products such as flooring, cladding, and three-ply architectural wall and ceiling panels. Project examples highlight a CNC routing method that produces panels with eye-catching patterns of varying depths and levels of intricacy. The course also examines how bamboo products may apply to several credits and features in the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s1062476/www.aecdaily.com/course/1081226
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1043405
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Curved elements, such as walls, ceilings, columns, soffits, light covers, clouds, and arches have often been used to add interest to architectural designs. This course outlines conventional methods of framing curves in wood and steel, as well as new methods of framing using flexible track systems. Discussions include options for wall coverings and trims for curved surfaces.
https://redirect.aecdaily.com/s18206/www.aecdaily.com/course/920731
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Rolling doors are used in heavy-duty, medium-duty, and light-duty applications for a wide range of commercial, industrial, and construction environments. This course provides a review of the features, components, options, and applications of various types of commercial rolling door products.
https://redirect.aecdaily.com/s10851/www.aecdaily.com/course/890158
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Plumbing design is highly regulated; improper design and installation can pose a serious health risk or result in costly property damage. This course reviews the plumbing codes and standards that govern plumbing fittings and fixtures, with special attention to standards to control the leaching of organics, metals, and lead into drinking water.
https://redirect.aecdaily.com/s3515/www.aecdaily.com/course/1024114
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Stormwater management is a critical component in any municipality to retain and infiltrate increased runoff volumes and flow rates from developed land that creates increased impervious cover (roofs and pavements). The course discusses the hydrologic and structural design fundamentals of permeable interlocking concrete pavement (PICP) and why it is an excellent choice to help meet stormwater management goals. Discussions include the benefits of using PICP, components of PICP, design and construction considerations and how use of PICP can help earn LEED® credits.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/865795
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Food and wine preservation refers to the process of storing products under ideal conditions in order to maximize longevity. Preserving food and wine maximizes its shelf life and flavor which, in turn, enhances the enjoyment of its consumption. Additionally, proper preservation results in less waste and saves the consumer money. This course reviews the causes of premature food deterioration, the optimal conditions for storing wine and food, and the solutions that are available with a focus on modern refrigeration units.
https://redirect.aecdaily.com/s14723/www.aecdaily.com/course/1000185
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Health, safety, and welfare remain fundamental aspects of building design practices. The principles of limiting risk through openings and the creation of safe separation distances remain fundamental to fire-resistive building design practices and the basis for modern model building codes. Incorporating fire-rated glazing products provides creative design options that adhere to current code. This course establishes the differences between fire-protective and fire-resistive glazing products and their proper applications, as well as the related test standards and current building code requirements for specifying architectural fire-rated glazing.
https://redirect.aecdaily.com/s148963/www.aecdaily.com/course/1036809
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.
https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Multiwall polycarbonate is an extremely versatile glazing material with high impact strength, excellent thermal insulation, and long-term light transmission. Compared to glass, it is much lighter and easier to handle, offering considerable savings in transportation, labor, and building costs. This course examines how multiwall polycarbonate systems can improve thermal energy efficiency and increase daylighting within a space, enhancing occupant productivity, health, and well-being.
https://redirect.aecdaily.com/s445386/www.aecdaily.com/course/1042506
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The Americans with Disabilities Act (ADA) applies to all state and local government agencies, commercial facilities, and public entities that have “places of public accommodation.” Presented in this course are the fundamentals of what accessibility means in terms of architectural door hardware specification. Topics include available hardware technology, the criteria for interior and perimeter access, and the codes and guidelines pertaining to the ADA requirements that affect door hardware selection.
https://redirect.aecdaily.com/s831648/www.aecdaily.com/course/849407
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification.
https://redirect.aecdaily.com/s840811/www.aecdaily.com/course/862566
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Metals are ubiquitous in today’s hardscape and are used in a variety of applications. This course reviews the important considerations related to the proper material, finish, and manufacturing technique to meet the function, aesthetic, and budget of metal designs for hardscape applications.
https://redirect.aecdaily.com/s921773/www.aecdaily.com/course/962287
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Third-party environmental product declarations (EPDs), using a life-cycle analysis (LCA) approach, provide a comprehensive analysis and quantification of a product’s sustainability. This course examines how EPDs can inform sustainable site furniture selection and how the use of sustainable site furniture can contribute to meeting various credit requirements of LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s20642/www.aecdaily.com/course/1095851
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Simultaneously improving indoor air quality (IAQ), decarbonizing buildings, and increasing resilience to outdoor pollutants has been extremely challenging because alternatives to conditioning large volumes of outside air to improve IAQ are not well understood. This course aims to change that by introducing a four-step Clean First framework for sustainable IAQ. This framework achieves better indoor air quality and energy efficiency with improved resilience to outside air pollutants. The course also provides recommendations for implementing a Clean First framework.
https://redirect.aecdaily.com/s963758/www.aecdaily.com/course/1022438
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Electric heating systems have been in use for over a century, and in that period, they have significantly advanced in terms of their efficiency, cost effectiveness, safety, versatility, and appearance. Recently, electricity production itself has become more and more environmentally friendly and economically viable. This course explores how the wide range of contemporary electric heating options can efficiently and economically address virtually every heating need in every building type and thus capitalize on the steadily increasing benefits of electricity to create the most environmentally responsible and economically viable heating solutions.
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/1036949
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Ground improvement refers to the application of geotechnical construction techniques to improve the performance of soils. These techniques are used when existing soils cannot provide satisfactory support of the planned structure. They improve the ground performance by increasing the strength and stiffness of the soil mass through densification, reinforcement, and/or cementing of soils. This course introduces ground improvement technologies and provides an in-depth review of aggregate piers and their design, installation, and benefits.
https://redirect.aecdaily.com/s12198/www.aecdaily.com/course/971086
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today’s building professionals and owners share enthusiasm for building envelope performance. Building envelopes separate the building interior from the exterior environment. As such, they are exposed to a variety of environmental loads, including wind pressure, solar radiation, and rain. This course provides an overview of the major thermodynamic considerations for the proper construction of the building envelope with a focus on insulated metal panels (IMPs) that provide all four control layers (air, water, vapor, and thermal) in a single-component system.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/848740
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
