Health, Safety, and Welfare
All courses identified as HSW, cover Health, Safety, and Welfare topics and have been approved by the AIA (American Institute of Architects) as an HSW Learning Unit (LU/HSW).
Displaying 401 - 425 of 562 results.
FIRST PREV [351-375] [376-400] [401-425] [426-450] [451-475] NEXT LASTScan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/991693
As impervious land cover increases, so does the need for stormwater management. Concrete grid pavements provide increased infiltration rates, positively affecting runoff flow while decreasing erosion. This course introduces the range of grid pavement and erosion control applications and provides design and construction guidelines. Environmental performance is defined via conclusions from several research projects. Concrete grid pavements require minimal maintenance when properly designed and installed in appropriate applications. This course also includes an overview of how concrete grid paving units can be used to meet a number of LEED® v4.1 BD+C credit requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1306/www.aecdaily.com/course/983339
Millions of Americans live with impairments that substantially limit major life activities. The Americans with Disabilities Act (ADA) guarantees that people with disabilities have the same opportunities as everyone else to participate in mainstream living by mandating that public facilities and services be fully accessible to people with disabilities. This course examines the accessible elements of a multiuser toilet room. Discussed are toilet room compliance with applicable accessibility codes and regulations relating to access, use, maneuverability, and safety, and accessible design issues associated with toilet compartment and lavatory accessories.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/1016042
Saunas that exude authentic Nordic minimalism and elegance promote wellness, relaxation, meditation, and socialization. There are many different types of saunas for private or public purposes, but a few unique features and finishing options set some sauna designs apart. This course explains why the sauna has a much deeper tradition than wellness and discusses the considerations for selecting a ready-made or tailor-made sauna solution.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s993236/www.aecdaily.com/course/1010166
Exterior cladding must be long lasting, maintenance-free, and aesthetically pleasing to meet the design demands of property and homeowners. An innovative composite cladding solution, developed with a patented technology that incorporates glass-reinforced polymers and graphite-infused polystyrene, meets and exceeds these requirements. This course describes the design challenges property and homeowners often face when selecting cladding, and it offers a solution. Performance characteristics such as thermal resistance, wind load resistance, and fire ratings are discussed. Installation techniques and a case study are also examined.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s19829/www.aecdaily.com/course/886429
Operable wall systems integrate the indoors and outdoors and define interior spaces, providing flexibility and additional usable area without increasing a building’s footprint. Occupants benefit from expansive daylighting and views as well as quick access to fresh air. This course describes the types of operable wall systems, how they contribute to sustainable design, and the various options and considerations for selecting the correct system.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/1121832
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13254/www.aecdaily.com/course/935532
The design community has become increasingly focused on ensuring that the products and places they create suit the diverse needs and differing abilities of everyone. This course explores how universal design principles and products can inform design to create places that are safer, more comfortable, visually appealing, and usable and that provide a richer experience for all users. This exploration utilizes the examples of door hardware and the needs of a diverse group of users including senior citizens and others to explain some of these principles and provides a detailed examination of a universally designed door latch.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1046426
In designing successful interior building spaces that positively impact their occupants, it is critical to have knowledge of the principles of acoustics and noise control and link them to design methodology. This course explores these principles, with a special emphasis on common building types where acoustics and noise control are often required and noise can have detrimental effects on users, such as athletic facilities and performance spaces.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/870117
Single-skin metal siding can be used for a wide range of projects, from commercial buildings to educational, healthcare, residential, agricultural, and even high-end architectural designs. These siding panels can also contribute to green designs and certification programs. This course explores the different types of single-skin metal siding, specification details, and performance and design considerations.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s679669/www.aecdaily.com/course/892209
Vinyl is strong and resistant to moisture and abrasion, and therefore is the most widely used plastic for building and construction. This course presents vinyl flooring and its manufacturing process, testing standards, and performance characteristics. The course discusses the environmental impacts of vinyl flooring throughout its life span and its contributions to meeting green building codes and standards.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/962747
Air barriers improve the health and comfort of building occupants, improve energy efficiency, and prevent premature degradation of materials, increasing the structure’s life cycle. A successful air and moisture barrier system means under-slab, below-grade, and above-grade systems must work together to provide a continuous barrier. This course looks at above-grade air barrier systems and their types and components. Continuity and compatibility, specification, and installation challenges are also considered.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s8598/www.aecdaily.com/course/1023138
If a facility experiences an environmental, accidental, or deliberate threat, the safety of the building and its inhabitants is a primary concern. Special-purpose doors and windows can address this concern by providing improved security in various applications. This course discusses the regulations and standards applicable to special-purpose doors and windows, including fire ratings, acoustical ratings, blast and pressure resistance, bullet resistance, and radio frequency shielding.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1009125
The inherent properties of concrete masonry, including strength, durability, and fire safety, have been well documented, though a perception of high cost persists. Due to significant changes to codes and standards that increased the flexibility of concrete masonry structural design, this construction method may also offer cost-effective and energy-efficient alternative solutions. This course reviews changes to ASTM C90 and the masonry design standard and includes a discussion on the benefits and opportunities these requirements bring.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/821308
Automated-shading systems are designed to maximize natural daylight, increase building energy efficiency, and ensure occupants have a comfortable environment with views to the outside. This course will explain how an automated shading system predicts, monitors, and responds to the daily microclimate surrounding a building to effectively manage daylight, solar-heat gain, occupant comfort levels, and energy use demands.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/881149
The spread of smoke in mid- and high-rise building fires is recognized as a major threat to the safety of the building occupants and responding fire personnel and the effectiveness of firefighting operations. This course explains how smoke migrates in a multistory building fire and discusses how building codes have evolved to address this danger and why they mandate smoke containment in specific areas of a structure. Product applications and assemblies designed to meet building code requirements and limit vertical smoke migration via elevator hoistways and lobbies are examined.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s940949/www.aecdaily.com/course/942214
This course encourages dialogue and shares methods to adopt inclusive design approaches within the daily practice of design while seeking to inspire industry professionals to imagine an inclusive world that is powered by your creativity and sense of humanity. As our world becomes smaller and smaller, humanity aspires to provide care, work, and play and live connected experiences that are more meaningful. As designers, it is our responsibility to create considerate environments that support this quality of life for all. This is the Future of Design.
In order to download this course, a USD $35.00 fee must be paid.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s841414/www.aecdaily.com/course/848681
The surface coating is the first line of defense in prepainted metal, and one of the most important elements to consider as part of a metal purchase. Selecting the right coating, finish, and paint system can affect product lifespan, energy efficiency, and aesthetic appeal. This course discusses the composition of prepainted metal, its application and performance, and examines the building and environmental factors that may influence the type of paint system specified.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/865795
Stormwater management is a critical component in any municipality to retain and infiltrate increased runoff volumes and flow rates from developed land that creates increased impervious cover (roofs and pavements). The course discusses the hydrologic and structural design fundamentals of permeable interlocking concrete pavement (PICP) and why it is an excellent choice to help meet stormwater management goals. Discussions include the benefits of using PICP, components of PICP, design and construction considerations and how use of PICP can help earn LEED® credits.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1114251
When building professionals gather, as they often do these days, to confer under the banner of ESG, the E tends to get the lion's share of the airtime. After all, there is a direct and readily understandable connection between buildings and environmental sustainability, and many of us have devoted significant time and effort to educating ourselves in best practices around this important facet of professional practice. But what about the S? How do those of us engaged in the business of the built environment drive bona fide social impact through the work we do? In fact, there are numerous paths available, and arguably, real social equity is reliant on a foundation of safe and stable housing as much as any other factor. During this webinar, we will explore needs and solutions in the realm of housing affordability and access while specifically touching on both our existing housing stock and impact-focused strategies for bringing new housing online.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/857032
It's time to stop thinking of only vertical pickets, horizontal rails, or glass panels when it comes to railing infill. Today's cable railing infill options are durable, versatile, attractive, low maintenance, easy to use, and virtually invisible. This course provides an overview of the advantages of stainless steel cable railing assemblies including frame design options and essential cable assembly components. It continues with a review of code requirements and concludes with a discussion of installation processes for custom cable assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1134203
As cities continue to grow, incorporating synthetic surfacing into rooftop spaces offers a safe, practical, and innovative solution to creating more livable, attractive, and resilient urban environments. The course explores synthetic rooftop surfacing, including its applications; environmental, health, and safety benefits; and product, manufacturer, and installer certifications. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/664137
Continuous insulation is part of building standards and state and energy codes due to its ability to reduce thermal bridging and the associated heat loss and energy consumption. This course looks at the use of polyisocyanurate as a continuous insulation in Type V and residential construction and its use as a multifunctional envelope component—air barrier, weather-resistive barrier, and vapor retarder—by reviewing code requirements for the building envelope.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/1078230
Architectural insulated metal panels (IMPs) are an increasingly popular choice for building developers and architects, presenting a compelling solution that combines functionality, efficiency, and aesthetic appeal. This course reviews the architectural IMP, its applications and benefits, and comparisons to other materials. It explores current trends and developments that are paving the way for increased aesthetic possibilities and building envelope performance.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s738249/www.aecdaily.com/course/815723
Obesity rates in the U.S. have reached epic numbers and correlate to significant health and economic impacts. Outdoor obstacle courses in public green spaces can provide appealing, effective, and free training equipment to the community to help increase physical activity. Review the theories of obstacle course training and guidelines for their design and installation.